Rosemount
For over 45 years, Rosemount has been recognized as the world leader in the design and manufacture of instrumentation, including a complete line of pressure, temperature, flow, and level products. The base for Rosemount's success is a commitment to product quality and reliability in the most demanding industries environments. read more
Rosemount proudly provides the broadest array of pressure measurement products for pressure, flow, and level applications. Rosemount leverages years of industry knowledge and experience to offer increased plant efficiency and safety at lower installed cost. Whether your application is critical control, safety, or monitoring, there is a Rosemount pressure product that best meets your needs.
Shop Our Rosemount Product Categories
Thermocouples
Thermocouples are a type of temperature sensor that uses two dissimilar metals joined at one end. Since different metals generate different voltages when exposed to a thermal gradient, the difference between the two measured voltages corresponds to temperature. Owing to their simplicity, adaptability and low cost; thermocouples are one of the most widely used temperature sensors available.
Temperature Transmitters
Temperature transmitters act as an interface between a temperature sensor and the display or control device. They convert the output signal of the sensor, a non-linear millivolt signal, into a linear milliamp signal which can be sent longer distances without degrading which results in more accurate measurements as well as a signal that can provide a platform for digital communications such as HART or Fieldbus.
Magmeters
Magmeters are volumetric flow meters that measure the voltage created when conductive liquids move through a magnetic field. They use energized coils outside the flow tube to create a magnetic field, which creates voltage proportional to the velocity of a conductive liquid passing through the area at a right angle. Fit for low-pressure and low maintenance applications.
Differential Pressure Flow Meters
Differential pressure flow meters use laminar plates, an orifice, nozzle, or Venturi tube to create an artificial constriction then measure the pressure loss of fluids as they pass that constriction. According to Bernoulli's principle, the pressure drop across the constriction is proportional to the square of the flow rate. The higher the pressure drop, the higher the flow rate. These rugged, accurate meters are ideal for a wide range of clean liquids and gases.
Vortex Flow Meters
Uses an obstruction in the flow stream to create downstream vortices which form alternating low and high pressure zones that oscillate at particular frequencies directly proportional to the velocity of the fluid.
Pressure Sensors
Pressure sensors are used in gas and liquid applications to transmit pressure readings to a control or display device via an electrical signal. This category of pressure sensing products includes pressure transmitters as well as pressure transducers. The type of pressure being interpreted (i.e. gauge, absolute or differential) varies by application and device.
Level Switches
Point level measurement instruments are used to mark a single, preset level condition such as the high or low-level condition that would trigger an alarm or switch. Level switches ensure a tank is never fully drained nor overflowing.
Level Transmitters
Level transmitters provide continuous level measurement over the range of the system rather than at a single point and produce an output signal that directly correlates to the level within a vessel. From depth and pressure, to float, radar, ultrasonic, and capacitive, these transmitters employ different technologies designed individually for specific level applications.
Available Products by Rosemount
Select a Filter Below
- CATEGORY
- Flow Meters ()
- Differential Pressure Flow Meters ()
- Electromagnetic Flow Meters ()
- Magmeters ()
- Vortex Flow Meters ()
- Flow Transmitters ()
- Gas Detectors ()
- Leak Detectors ()
- Level Instruments ()
- Level Switches ()
- Level Transmitters ()
- Particle Counters ()
- Pressure Gauges ()
- Pressure Sensors ()
- Pressure Transducers ()
- Pressure Transmitters ()
- Temperature Transmitters ()
- Thermocouples ()
- APPLICATION
- ()
- ()
- ()
- ()
- ()
- ()
- ()
- ()
- ()
- ()
- ()
- ()
- ()
- ()
- ()
- ()
- ()
- ()
- ()
- ()
- ()
- ()
- ()
Wafer or flanged style Vortex flow meters available with multivariable output & internal temperature sensor option
Select options for pricing
Flexible Coplanar platform up to 4000 psi with 4-20mA HART protocol, Profibus, FOUNDATION fieldbus, or wireless output
Starting at
$2,256.71
Advanced temperature transmitter with superior accuracy, stability, and reliability for critical control and safety applications
Starting at
$1,467.93
High performance magnetic flow meter with transmitter customized for water, wastewater & utility applications
Starting at
$3,497.00
$2,168.14
Versatile gauge or absolute pressure transmitter with unmatched long-term stability and reliability
Starting at
$2,077.29
The Coplanar Platform allows seamless integration with manifolds, primary elements, and seal solutions
Starting at
$2,013.23
Non-Contacting radar level transmitter uses enhanced technology with PTFE seal design eliminating the need for o-rings
Starting at
$3,898.77
Versatile pressure transmitter with flexible Coplanar platform to meet all pressure, level, and flow needs
Starting at
$2,137.84
8705 and 8707 flanged flowtube sensors for conductive liquids and slurries
Starting at
$3,449.00
Accurate, stable, and reliable pressure measurement at a great price
Starting at
$1,550.16
Highly accurate head and rail mount temperature transmitter
Starting at
$906.38
Liquid level transmitter based on ultrasonic technology suitable for liquid applications
Starting at
$1,324.76
Piezoresistive sensor technology allows calibrated spans from 0.3 to 10000 psi (20.7 mbar to 689 bar)
Starting at
$1,831.25
PT100 sensor type RTD temperature sensors with a max temperature range option of -321 to 1112°F
Starting at
$158.85
$127.08
Vibrating short fork liquid point level switch with four switching functions
Starting at
$555.34
Compact differential pressure flow meter ideal for the volumetric measurement of clean liquids, gas, and steam
Starting at
$3,402.12
Combine the proven 3051C pressure transmitter and the latest primary element technology
Select options for pricing
Available in a wide variety of style and materials to meet any temperature process requirement
High performance 2-wire guided wave radar level
Starting at
$3,737.19
Absolute or gauge pressure measurements to 10,000 psi with advanced capabilities designed to meet a wide range of applications
Starting at
$1,989.34
Precision level and specific gravity measurement for a wide variety of tank configurations
Starting at
$3,590.79
Type J, Type K, & Type T thermocouple temperature sensors with a max temperature range of -321 to 2192°F
Starting at
$49.91
$39.93
Measure average flow and totalized volume, simple connection to a turbine meter or a pulse output device
Starting at
$2,172.10
Compact differential pressure flow meter for reliable and accurate volumetric flow measurement
Starting at
$3,656.76
Economical, compact and lightweight alternative to flanged magnetic flow meters
Starting at
$2,848.00
Reliable, cost-effective volumetric differential pressure flow meter
Select options for pricing
A complete head-mount temperature assembly for any Single Point measurement application
Starting at
$579.40
Transmitter designed for harsh production conditions and that can withstand static pressures up to 15,000 psi
Starting at
$13,396.54
Guided wave radar level and interface transmitter
Starting at
$3,118.43
Self-centering plate design eliminates installation errors that are magnified in small line sizes
Starting at
$4,010.52
Wireless HART capabilities, 4.5 inch (114 mm) dial size, ranges from vacuum up to 4,000 psi (275 bar)
Starting at
$1,499.48
Utility Vortex Flow Meter designed for general purpose, clean fluids and steam flow applications
Starting at
$3,880.00
Scalable level transmitter for liquid level applications with coplanar and in-line sensor module platforms
Select options for pricing
Enhanced vibrating fork liquid level switch, electronic self-checking and condition monitoring
Starting at
$1,025.35
Accepts eight independently configurable RTD, thermocouple, ohm, and millivolt inputs
Starting at
$3,131.55
A complete rail-mount temperature assembly for any single point measurement application
Starting at
$589.28
Measures differential pressure, static pressure, and process temperature while dynamically calculating mass flow 22 times per second
Starting at
$2,352.01
Wireless temperature transmitter designed with a dual-compartment housing for field reliability, x-well technology
Starting at
$2,850.51
Automates level & interface measurements in hard to reach locations, simple no wire installation with a self-organizing wireless network
Starting at
$4,442.06
Specifically designed for food, beverage and pharmaceutical applications requiring reliable, safe and hygienic design
Starting at
$1,095.00
Wireless discrete transmitter with liquid hydrocarbon detection, Wireless HART technology
Starting at
$2,126.36
Compact orifice primary element installs easily between any existing raised face flanges without creating additional pipe penetrations
Starting at
$1,024.61
Flange mounted liquid level transmitter for precise level and specific gravity measurement up to 300 psi
Starting at
$3,454.38
4-20 mA signal less susceptible to noise, increased performance over wiring sensors directly
Starting at
$275.04
Measures liquid height, distance to liquid, volume, or flow in open channels, eliminates problems experienced with contacting instrumentation
Starting at
$1,046.40
The Rosemount 4600 is a compact, reliable transmitter designed to meet your panel-mount pressure measurement needs
Starting at
$1,714.92
Non-intrusive design for fast and easy temperature measurement in piping applications
Starting at
$287.49
This Airborne Particle Monitor (APM) is the industry’s only infrared optical monitor that is certified for use in hazardous areas
Starting at
$9,401.00
Coplanar and In-Line sensor module platforms, variety of process connections
Starting at
$2,337.34
Vibrating fork liquid point level switch with performance unaffected by flow, turbulence, bubbles, foam, vibration, or solids content
Starting at
$266.35
Compact differential pressure flow meter for reliable and accurate flow measurement for gas, liquid and steam applications
Starting at
$3,533.11
High sensitivity radar level transmitter
Starting at
$6,696.68
Detects & transmits acoustic level & temperature data with Wireless HART, improving efficiency & visibility
Starting at
$1,145.50
Accurately measures the flow of a liquid, gas, or steam fluid in small pipe applications
Starting at
$1,190.24
Reliable volumetric flow meter with integrated pressure transmitter for simple, cost-effective installation
Starting at
$4,534.78
Sanitary absolute and gauge pressure transmitters for food and pharmaceutical industries
Starting at
$2,273.29
Wireless liquid level detector for reliable point level detection, electronic self-checking and condition monitoring
Starting at
$2,246.42
Engineered for pressure and hydrostatic level applications in the food and beverage industry
Starting at
$798.34
Combines the 2051C pressure transmitter and the latest primary element technology
Starting at
$3,892.92
Instantaneous response to all gas leaks within a 65ft (20m) radius through four independent sensors, suited for outdoor applications
Starting at
$17,532.92
Up to 300 psig gauge pressure, conforms to 3-A and EHEDG standards, 100:1 rangeability
Starting at
$2,048.29
Coplanar and In-Line sensor module platforms, variety of process connections
Select options for pricing
Cut-to-fit platinum RTD provides flexible and reliable temperature measurements in process environments
Starting at
$146.04
Lightweight, compact, rugged transmitter ideal for the pulp and paper industries
Starting at
$2,264.36
Using guided wave radar, provides accurate & continuous level measurements in the food & beverage industry
Starting at
$1,017.29
Detects hydrogen sulfide, carbon monoxide, and oxygen depletion in remote applications previously too challenging and costly to monitor
Starting at
$3,376.32
Provides accurate and repeatable temperature measurements in the food and beverage industry
Starting at
$334.64
Drift monitoring diagnostics and sensor backup technology, to ensure your food and beverage operations are in specification
Starting at
$631.66
Hygienic Pressure Transmitter designed for measurements in the life science, food and beverage industries
Starting at
$1,662.03
Vibrating rod level switch suited for full, demand and empty detection of fine grains and powders in storage and process vessels
Starting at
$786.52
Vibrating fork level switch suitable for fine-grained and powdered medias, in storage and process vessels
Starting at
$518.64
Capacitance probe level switch designed for low dielectric medias and extreme conditions such as high temperatures, high mechanical stress and high tensile forces
Starting at
$829.64
Withstands heavy loads, extreme temperatures, and is suitable for full, demand or empty detection for all bulk media in all types of vessel
Starting at
$536.07
Vibrating fork level switch suitable for fine-grained and powdered media in storage and process vessels where high sensitivity is needed
Starting at
$843.40
Features multiple diagnostic suites and advanced diagnostic capabilities for unparalleled process management capabilities
Starting at
$2,912.00
Factory Assembled, leak tested, and calibrated Manifold
Connects WirelessHART networks with host systems & data applications, offers network flexibility for remote indoor operations
Starting at
$1,944.06
7.2V intrinsically safe power module designed to withstand harsh environments & replace easily while in the field
$187.08
The seal is mounted flush against a raised face (flush optional) process flange for general purpose applications with large line sizes
Select options for pricing
Remote mount flow transmitter for Rosemount magnetic flow meters
Starting at
$3,237.00
Convert a digital HART signal into three additional analog signals, easy to configure and install
Starting at
$930.93
NEMA 4X gateway connects WirelessHART networks with host systems with the capacity for up to 100 devices
Starting at
$5,119.87
Field signal conditioner for Rosemount transmitters, LCD or analog meter
Starting at
$623.06
Factory assembled, leak-tested, and calibrated inline manifolds
Starting at
$229.13
Combines with a network manager to extend network communication & increase flexibility of the installation location
Starting at
$2,446.82
Rosemount 304 Conventional Manifold Capable of both Traditional and Wafer Style Construction
Starting at
$357.85
Enables wireless capabilities for 2, 3, or 4-wire HART devices to remotely manage, monitor & gather data
3.6V intrinsically safe power module designed to withstand harsh environments & replace easily while in the field
$127.86
The seal is bolted in place between the lower housing, which is threaded onto the pipe, and a mounting connection ring
Select options for pricing
Ensures traceability to NIST standards, used to recalibrate Rosemount 8712 C/D/E, 8732 C/E, and the 8742C transmitters
$3,244.00
Reduces pipe straight-run, direct-mount capability, 2 to 24" (50 to 600 mm), for differential pressure only
Starting at
$558.18
The seal is mounted flush against a raised face process flange for general purpose applications with small line sizes
Select options for pricing
Provides control functionality for any 4-20mA or HART compatible transmitter
Starting at
$1,541.65
Manifold with two-piece stem design for use with 3051S In-Line Pressure Transmitter
Starting at
$270.32
Hands-on, professional instruction from an experienced and certified service technician
Starting at
$4,500.00
Remote mount cables for the 8712EM / 8732EM / 8750W
Remote mount cables for the 8712ES and 8732ES
Starting at
$50.00
Small footprint seal with capillary connection on the side for general purpose applications with limited space
Select options for pricing
The seal is mounted flush against a raised face process flange with ring type joint (RTJ) gasket surface for 2 or 3 inch line sizes
Select options for pricing
Manifold with two-piece stem design for use with 3051S Coplanar Pressure Transmitter
Starting at
$644.57
The diaphragm surface is flush with the tank wall to eliminate plugging that is common in some applications such as pulp and paper
Select options for pricing
Per day fee for installation verification and commissioning from Rosemount service technicians
$1,862.42
Designed for use with a wedge flow primary element (or a chemical tee) that requires an eight-bolt connection pattern
Select options for pricing
The seal is mounted flush against a raised face process flange with ring type joint (RTJ) gasket surface for small line sizes
Select options for pricing
Lower housing spud welded to the pipe with seal either sleeve-style or threaded to the spud, primarily for pulp & paper applications
Select options for pricing
Groove or tongue process flange connection style for DN50 or DN80 line sizes and European or Russian standards
Select options for pricing
Hardware Kit for Mounting a Rosemount 248 to a DIN rail (includes clip for symmetrical rails)
$24.86
Per day fee for installation verification and commissioning from Rosemount Flow service technicians
Starting at
$1,700.00
Consistent toxic gas sensing to challenging and remote locations
Starting at
$746.11
Hygienic adapters used with 326P, 326L, and 327T
Starting at
$93.70
No gas is supplied with this verification kit, must be ordered separately
$4,625.03
IO-Link Master with Profinet Interface or Ethernet IP interface, 4 or 8 port
Starting at
$494.30
Programming software for the Rosemount 148, serial or USB connections available as options
Starting at
$359.17
Electromechanical relay board (ML7-RL305) c/w option board (ML7-OP100)
$472.77
PTV gas, includes dangerous goods note, batch analysis, MSDS, and instructions (English)
$1,945.89
Tri-clover style Tri-Clamp seal, conforms to 3-A Standard 74-06 and EHEDG Type EL Class I
Select options for pricing
Hygienic tank spud seal, conforms to 3-A Standard 74-06, 316L SST
Select options for pricing