MTL Instruments
MTL Instruments, part of Eaton's Crouse-Hinds series portfolio, has a wealth of knowledge and expertise alongside a reputation as a leading global provider of intrinsic safety explosion protection devices and systems for use in process control applications. Key applications also include fieldbus and industrial network components, HMI and visualization, surge protection, alarm management and gas analysis. read more
Many of the world’s most safety-critical processes are monitored, controlled, visualized or protected by MTL products. MTL products are used in all types of locations, both hazardous and general purpose; from offshore oil and gas platforms, power production plants and petrochemical installations to pharmaceuticals, telecommunications and other manufacturing/process plants.
Select a Filter Below
- CATEGORY
- Barriers ()
- Isolators ()
- Panel Meters ()
- Power Supplies ()
- Surge Protectors ()
- APPLICATION
- ()
- ()
- ()
- ()
DIN-rail zener barriers limit the amount of energy transferred across the barrier to a level that cannot ignite flammable atmospheres
Safeguards electronic process transmitters against induced surges and transients from field cabling
Ultimate mains power protection solution is available with either a 200 or 170kA surge handling capability
Starting at
$1,732.00
Isolates hazardous and safe area circuits to avoid earth-loop problems and DIN rail mounted for simplified installation
Combines features to make it the ultimate surge protection solution for process equipment, I/O systems and communications networks
Protects electronic equipment and computer networks against the effects of 'noise pollution' induced in mains power supplies
Offers a high packing density, high protection level and low price making it a valuable solution for protecting digital or analog I/O
DIN-rail mount module with an embedded power bus that can accept 7 different inputs
Starting at
$171.00
Intrinsically safe indicators are loop powered with low voltage drop across their input terminals for installation in almost any 2-wire, 4-20mA loop
Starting at
$858.00
Backplane mounting, high efficiency isolating interfaces with system vendors in mind
Starting at
$260.00
High performance, high capacity surge protection designed for use in a wide variety of industrial, institutional and commercial applications
Starting at
$344.00
Specifically designed surge protection for process transmitters and devices on Fieldbus systems
Starting at
$188.00
Self-healing surge protector adds AC fault withstand capability and current limiting protection to traditional hybrid surge technology
Starting at
$177.00
Uniquely modular communication line interface protection system for IT networks and industrial communication systems
Intrinsically safe isolated power supplies are ideal for providing power to instrumentation in hazardous process areas
Starting at
$798.00
Combines all the advantages of all mode protection with features and options to meet the needs of the most complex protection requirements
Starting at
$3,661.00
Provides easy-to-mount protection for AC powered, field -mounted transmitters
Starting at
$293.00
Can be incorporated into individual items of electrical equipment providing immediate local protection against surges and electrical noise
Starting at
$136.00
Versatile high performance surge and transient protection for LED lighting systems and drivers
Starting at
$41.00
Prevents surges and transient over-voltages conducted along the Trunk or Spurs of fieldbus systems from damaging electronics
$270.00
Multi-stage hybrid devices offer cost effective surge protection for digital and analog I/O
Twelve outlet rack mounted surge protector that provides superior surge protection in a compact 1U enclosure
Starting at
$155.00
Screws into spare conduit entry on field-mounted process transmitters providing surge protection where it matters, right at the unit
Starting at
$334.00
Protects electronic equipment power supplies and computer networks against the effects of 'noise pollution' induced in mains power supplies
Starting at
$501.00
Cost effective, Class II surge protection designed to cope with secondary currents as described in IEC 61312
Provides a far greater level of protection for field-mounted transmitters then is available from the transmitter manufacturers
Starting at
$286.00
High capacity surge protection to 100kA per phase for applications at distribution boards and small service locations
Starting at
$1,231.00
High-power surge protection specially designed for the water/wastewater industry with the whole unit encased in corrosion resistant housing
$75.00
Protects load cell and weighing systems from malfunctions or damage caused by severe overvoltages or impulse currents on signal cabling
$533.00
Provide single or dual power to MTL 1000 signal conditioning isolators with power monitor alarm
$136.00
Provides an effective barrier between uncontrolled transient environments and your valuable telecommunications equipment
Starting at
$71.00
Prevents surges and transient over-voltages conducted through data and signal cabling from causing damage to electronic systems
Starting at
$201.00
Uniquely customer configurable surge protectors can be utilized as stand-alone devices or to create an unlimited multi-port protection system
Starting at
$131.00
20kA rated, single phase devices provide protection for ac or dc power supplies with no restriction to the amount of load current
Starting at
$614.00
The ultimate power protection solution combines unparalleled power handling capability, application versatility, proven circuitry along with simple installation
Starting at
$3,461.00
Lightning surge protection for modems and telemetry equipment connected to public switched telephone networks
Starting at
$278.00
Attaches to the base of a DIN rail at either end or at intervals to isolate the IS earth from a structural earth
$38.00
Provides connection for routing the IS earth from the DIN rail to an appropriate plant earth
$26.00
In Stock
Nickel-plated T-section (35mm x 7.5mm) DIN rail for use in potentially corrosive atmospheres, 1 meter length
$48.00
Nickel-plated, 1m rail for terminating earth returns and cable screens from a hazardous area
$61.00
In Stock
Nickel-plated earth-rail bracket, straight or offset
One required at each end of a tagging strip/earth rail, suitable for low-profile (7.5mm) and high-profile (15mm) symmetrical DIN rail
$30.00
In Stock
Provides connections for the high-integrity IS earth for linking between sections of busbar, bag of 50
$137.00
In Stock
DIN rail power bus connectors for MTL 1000 signal converter isolators
$136.00
Used for a single power supply feed directly into the power bus
$12.00
Standard backplanes available to accommodate 4, 8, 16, or 24 modules using screw-clamp connectors for the safe-area circuits
Starting at
$205.00
Custom backplanes for integrating MTL4500/HART modules directly into existing system architecture
Starting at
$538.00
Insulating mounting blocks are a convenient method of supporting the busbar
$49.00
Battery operated remote monitoring unit for ZoneMaster or ZoneSentinal surge protectors
$193.00