Well-run companies recognize that a modest investment in a robust preventative maintenance program is one of the most direct ways to protect the investments they have made in their facilities and equipment as well as to ensure production is not interrupted by a breakdown. Instruments designed to detect excessive vibration, electrical spikes, heat build-up, or to determine the condition of the insulation on wire and motor windings are all cost-effective means of identifying areas of concern before they disrupt your business.

Select a Filter Below

Sort by:
GE Inspection Technologies DM5E Ultrasonic Thickness Gauge
Portable corrosion monitoring with high stability and repeatability at normal and elevated temperatures, designed for harsh environments
In Stock
GE Inspection Technologies DMS Go+ Thickness Gauge
Ultrasonic thickness gauge suited for a wide range of applications including measuring for corrosion in the oil and gas sector
In Stock
Bently Nevada 177230 Seismic Transmitter
Provides a 4-20 mA signal proportional to the 0-1 inch/sec 0-pk velocity movement of a roller element bearing housing or machinery housing
Select options for pricing
In Stock
Druck DPI 612 Flex Series Pressure Calibrator
Three model choices, generate as low as 95% vacuum or as high as 15000 psi with accuracy up to 0.005% FS
  • FREE Pressure module (over $1660 value)
In Stock
Bently Nevada 990 Vibration Transmitter
Provides a 4-20 mA signal proportional to relative vibration on smaller, non-critical machinery
Select options for pricing
In Stock
Bently Nevada 1900/65A General Purpose Equipment Monitor
Continuous monitoring and protection, stand-alone operation on general-purpose equipment
Select options for pricing
Bently Nevada 2300 Series Vibration Monitor
Continuous monitoring and protection, self-contained, compact, stand-alone vibration monitoring
Select options for pricing
In Stock
Setra MicroCal Pressure Calibrator
Stand-alone calibration standard for differential and gauge pressure sensors found in critical environments
Isotech Venus 4951 Temperature Calibrator
Isocal-6 portable dry block calibrator for temperatures from -35 to 140°C, can be converted to a liquid bath calibrator
Bently Nevada Model 9100D Shaker Table
Portable shaker table, 7 to 10 kHz frequency range, industrial pelican storm case, NIST traceable transducer
Call for pricing
Fluke 810 Vibration Tester
On-board identification and location of the most common mechanical faults, fault severity scale with four levels
In Stock
Isotech milliK Precision Thermometer
Range of sensors: SPRTs, PRTs, thermistors, thermocouple and 4-20mA
Bently Nevada vbBalancer Unbalance Correction Packages
Measure unbalance and calculate correction weights, formerly known as Commtest vbBalancer
Select options for pricing
In Stock
Dakota Ultrasonics CMX Series Thickness Gauges
Measure material and coating thickness simultaneously, detects pits & flaws in a single mode (PECT)
Isotech 982 Hyperion Blackbody Source
Low-temperature blackbody source infrared calibrator: -10°C to +80°C
AEMC Model 6527 Digital Megohmmeter
Specially designed for testing installations and equipment up to 1000V
Megger MIT410/2 Insulation Tester
Insulation testing up to 1000V and 200GΩ with with PI, DAR and switch probe
Fluke 805 FC Vibration Meter
Innovative sensor design minimizes measurement variations caused by device angle or contact pressure, Fluke Connect compatible
In Stock
Dakota Ultrasonics MAX II Bolt Tension Monitor
Uses ultrasonic transit time technology to measure the elongation, load, stress and percent strain of a fastener under tension
Dakota Ultrasonics Mini-Max Bolt Tension Monitor
Ultrasonically measures the actual elongation produced by tightening a threaded fastener
FLIR DM284 / DM285 Imaging Multimeter
Professional, all-in-one True RMS multimeter and thermal imager shows the exact location of electrical problems
In Stock
Setra Power Patrol Power Meter
Advanced, networked 3-phase power meter
Horiba LAQUAact EC-110 Meter
Measures conductivity, resistivity & TDS, with IP67 protection & built-in memory with up to 1,000 data points
AEMC Model 5050 Megohmmeter
Highly innovative 5000 V megohmmeter with features not found on any other unit on the market today
Monarch VBX Vibration Stroboscope
Compatible with CSI and SKF analyzers, portable, 30‐50,000 FPM flash range, direct triggering from accelerometers
Isotech Greybody 975 Infrared Calibrator
Economical greybody source for low-end thermometers
NoShok 3010 Series Chain Hoist Test Kit
For friction clutch testing on chain hoists, 90 to 7,700 lbs load range, accuracy less than 2.2 lb
AEMC Model 6524 1000V Megohmmeter
True megohmmeter, 1 kV insulation and multi-function test, resistance, continuity, frequency and voltage tests
Dakota Ultrasonics UMX-2 Thickness Gauge
Underwater material, 1000ft depth rating, single membrane & dual element probes
AEMC Model 6555 Megohmmeter
Detection and measurement of input voltage, frequency, and current prior to running a test, test voltage up to 15kV
Laurel Laureate Process & Ratio Panel Meter
Digital panel meter with scalable readout & control outputs for pressure, level, flow, and other process signals
AEMC Model 6501 Megohmmeter
500 V/1000 V hand-cranked megohmmeter with insulation measurements to 200 MΩ and 5000 MΩ
AEMC Model 5060 Megohmmeter
Highly innovative 5000 V megohmmeter with RS-232 digital communications
AEMC Model 6505 Megohmmeter
5000 V megohmmeter provides insulation measurements from 30 kΩ to 10 TΩ
AEMC Model 6526 1000V Megohmmeters
Resistance, capacitance, continuity, frequency and voltage tests, 1 kV insulation, true megohmmeter
AEMC Model 1950 Infrared Camera
6,400 pixels (80x80) resolution, -4 to 482°F, 75:1 (D:S), 2% accuracy, 20° x 20° field of view
AEMC Model 1060 Megohmmeter
Fully automated, 1000V insulation tester with RS-232 interface and 128 kB memory
AEMC Model 6522 1000V Megohmmeter
True Megohmmeter, 1 kV Insulation and Continuity Tester, 250V/500V/1000V Insulation Test Voltages
AEMC Model 5070 Megohmmeter
Highly innovative 5000 V megohmmeter with graphical display and RS-232 digital interface
AEMC Model 6503 Megohmmeter
500 V/1000 V hand-cranked megohmmeter with insulation measurements to 200 MΩ and 5000 MΩ
AEMC Model 1050 Megohmmeter
Automatic measurement features and user friendly functions makes testing quick and accurate
AEMC Model 6532 100V Megohmmeter
Resistance, capacitance, continuity, frequency, voltage and line length tests, 50V and 100V insulation test voltages
AEMC Model 6550 Megohmmeter
Detection and measurement of input voltage, frequency, and current prior to running a test
AEMC Model 6536 Megohmmeter
50V and 100V insulation test voltages, 20GΩ max insulation resistance, continuity tests at 20mA or 200mA