Megger MIT410/2 Insulation Tester

1006-732

Megger

5 in stock

Need Help? Call 1-800-884-4967 8:00am to 5:30pm ET

Features

  • Designed for Electrical and Industrial testing
  • Insulation testing from 50 to 1000V and 200GΩ
  • 2% test voltage accuracy
  • Stabilized insulation test voltage
  • Polarization Index (PI) and Dielectric Absorption Ratio (DAR) functions
  • True RMS voltage measurement to 600V AC or DC with resolution from 0.1mV
  • Frequency measurement from 15 to 450Hz
  • Single range, faster continuity testing from 0.01Ω to 1MΩ
  • Automatically test to a time limit
  • CAT IV 600V / CAT III 1000V
  • IP54 rated providing a weatherproof case to reduce the chances of water ingress
  • Live circuit detection and protection
  • Auto reverse polarity
  • PASS/FAIL indication on limit alarms

What's in the Box

  • Red/black silicone test leads with probes + clips
  • SP5 remote switch probe
  • 6 AA alkaline batteries
  • Hard carry case
  • Owner’s information CD

The Megger MIT410/2 insulation tester is a versatile instrument that offers testing from 50 to 1000V and 200GΩ. Though the MIT410/2 is designed primarily for industrial applications, it offers a wide range of functions that allow it to excel in an exceptionally wide range of applications including electrical installations, cable testing, motor testing, automotive, ESD, panel building, avionics, maintenance, and others.

In addition to insulation testing, the Megger MIT410/2 also offers True RMS voltage measurement to 600V AC or DC as well as single range continuity testing from 0.01Ω to 1MΩ and frequency measurement from 15 to 450Hz. All measurements are accurate up to ±2%. The large main digital readout provides good visibility of all main measurement results while a second digital display provides additional data such as test mode, test voltage, supply frequency or others. The included analog arc display shows essential charge and discharge characteristics not visible on a digital display and displays as a single pointer "needle" with response similar to a moving coil meter. The MIT410/2 also includes Polarization Index (PI) and Dielectric Absorption Ratio (DAR) functions.

The Megger MIT410/2 insulation tester is sealed to IP54, providing a weatherproof case to reduce the chances of water ingress, including the battery and fuse compartment. Rubber over-molding combines the tough shock absorbing outer protection with excellent grip providing an almost indestructible case. The MIT410/2 offers CAT IV 600V / CAT III 1000V safety protection.

Typical applications for MIT410/2 includes:

  • Commercial Avionics
  • Military Land, Marine and Air communications
  • Manufacturing/production line goods
  • Electrostatic measurement
  • Component testing
  • Battery powered traction and lifting equipment
Megger 1007-157 SP5 Remote Probe
Replacement CAT IV 600 V switched test probe for the MIT400 Series Insulation Tester
$160.00
Megger 1002-001 Test Lead Set
Replacement red and black test lead set with crocodile clips
$143.00
Megger 1002-015 Test Leads
FPK8 fused test leads, prods and clips (max 660V, 500mA fuse) straight
$195.00
Megger 1007-160 Test and Carry Pouch
For MIT400 series insulation testers
$98.00
Megger 6121-626 Rubber Boot with Built-In Stand
For use with MIT400 series insulation testers
$71.00

Applications

This product can be used in the following applications: