Fuji Electric
Fuji Electric Systems Group, Inc. is a worldwide leader in the design and manufacture of Temperature & Process Controllers; Ultrasonic Flow Meters; Strip Chart & Videographic Recorders; Temperature & Pressure Transmitters; and more. read more
Measuring systems technologies and components are constantly evolving. Fuji Electric is at the forefront of tomorrow's measuring solutions.
Shop Our Fuji Electric Product Categories
Available Products by Fuji Electric
Select a Filter Below
- CATEGORY
- Combustion Analyzers ()
- Drives / Inverters ()
- Flow Meters ()
- Ultrasonic Flow Meters ()
- Flow Transmitters ()
- Level Instruments ()
- Level Transmitters ()
- Oxygen Transmitters / Analyzers ()
- Panel Meters / Digital Indicators ()
- Pressure Sensors / Transmitters / Transducers ()
- Process Controllers ()
- Recorders ()
- Strip Chart Recorders ()
- Videographic / Paperless Recorders ()
- Temperature Controllers ()
- Valve Motor Drive (VMD) Controllers ()
- APPLICATION
- ()
- ()
- ()
- ()
- ()
- ()
- ()
- ()
- ()
- ()
- ()
- ()
- ()
- ()
- ()
- ()
- ()
- ()
Self-tuning 1/16 DIN (48 x 48mm) compact temperature and process controller with 50ms sampling speed
Starting at
$219.00
Advanced, self-tuning 1/16 DIN temperature and process controller with 16 ramp / soak segments
Advanced, self-tuning 1/32 DIN temperature and process controller with 16 ramp / soak segments
Transit time, clamp-on flow meter for noninvasive liquid flow measurement
Compact paperless chart recorder displays up to 6 channels of data
Self-tuning 1/4 DIN (96 x 96mm) compact temperature and process controller with 50ms sampling speed
Starting at
$294.00
Accurately measure differential pressure, liquid level, gauge pressure or flow rate
Starting at
$1,412.00
Self-tuning 1/8 DIN (48 x 96mm) compact temperature and process controller with 50ms sampling speed
Starting at
$269.00
Versatile 1/16, 1/8 and 1/4 DIN PID controllers with many input/output points and sophisticated control functions
Ultrasonic flow meter, two transducers and all the accessories needed for setting up a flow measurement system on a range of pipe sizes
$7,299.00
In Stock
Compact recorders display up to 18 channels of data
Ultrasonic flow meter, FSSC transducer and all the accessories needed for setting up a flow measurement system on a range of pipe sizes
$6,149.00
In Stock
Ultrasonic flow meter, FSSD transducer and all the accessories needed for setting up a flow measurement system on a range of pipe sizes
$6,149.00
In Stock
180mm six-color ink jet chart recorder, up to twelve channels and can record data in analog or print in high speed with digital mode
Provides the industry’s highest performance for three-phase applications from 1/2 to 1,000 hp
Starting at
$706.00
In-situ zirconia oxygen analyzer for continuous measurement of combustion exhaust gases of industrial boilers and furnaces
Starting at
$2,025.00
100mm six-color ink jet chart recorder, up to six channels and can record data in analog or print in high speed with digital mode
Starting at
$2,343.00
Compact inverter with choice of single- or three-phase models and a range of horsepower options
1/16, 1/8, and 1/4 DIN valve motor drive controllers with 50ms sampling speed, position feedback option available
Starting at
$377.00
Highly accurate combination pulse Doppler and transit time flow meter
Starting at
$7,700.00
100mm Inkjet strip chart recorder features 1- or 2-channels
Industry's highest level of efficiency, optimized for HVAC applications
Starting at
$800.00
Zirconia oxygen analyzer for use in hazardous locations
Starting at
$5,500.00
Air or nitrogen measurements, 25 to 200mm diameter sizes available, various output functions
Starting at
$1,680.00
1/16, 1/8, and 1/4 DIN valve motor drive controllers
Adjustable frequency AC drive with customizable logic for up to 200 steps
Starting at
$275.00
High-speed and high-performance 1/4 DIN process and temperature controller
Large screen paperless recorder with up to 36-channels and compact flash memory
Starting at
$4,839.00
Transit time difference method with the advanced ABM (anti-bubble measurement) system
Starting at
$5,800.00
Accurately measure absolute pressure with state-of-the-art microprocessor technology
Starting at
$1,652.00
Allows users to remotely operate FRENIC-Mini series of inverters
Starting at
$80.00
Ethernet communications interface card for the Fuji Electric FRENIC-Mega inverter
$425.00
Universal recorder ink head for the Fuji Electric PHA, PHC and PHE strip-chart recorders
$175.00
In Stock
21.26 inch rail for 2 to 48 inch pipes, -40 to 248°F, 1MHz, includes mounting straps and silicone grease
$1,150.00
In Stock
12.6 inch rail for 0.5 to 4 inch pipes, -40 to 212°F, 2MHz, includes mounting straps and silicone grease
$1,150.00
In Stock
Direct insertion zirconium oxide oxygen detector for non-hazardous applications
Starting at
$1,550.00
Allows users to remotely operate FRENIC-Eco, FRENIC-Mega, or FRENIC-Multi series of inverter
Starting at
$185.00
Straight type extension cable with RJ-45 jacks for remote keypad operation
Starting at
$40.00
Increases the regenerative braking capability of the FRENIC-Mini series inverters
$37.00
Replacement filters for Fuji Electric ZFK8 and ZFKE sensors
6 Packs of 100mm Chart Paper for Fuji's PHC/E Strip Chart Recorder
$100.00
Pair of 16 foot cables with Lemo connectors on one end and BNC male connectors on the other
$385.00
In Stock
One pair of replacement batteries for Fuji's Portaflow-C ultrasonic flow meter
$350.00
Remote keypad with RJ-45 connector and LCD display that can memorize or copy three function data sets
$250.00
Use a DC reactor (DCR) to correct the inverter power factor and suppress harmonics
Starting at
$855.00
Connects the FRENIC-Mega inverter to a Fuji MICREX series of programmable logic controllers (T-Link module)
$760.00
8 to 235 inch pipes, -40 to 175°F, 0.5MHz, includes 16ft signal cable, mounting straps and silicone grease
Starting at
$2,750.00
21.26 inch rail for 0.5 to 12 inch pipes, -40 to 212°F, 2MHz, includes mounting straps and silicone grease
$1,150.00
In Stock
19 inch rail for 2 to 16 inch pipes, -40 to 390°F, 2MHz, includes mounting straps and silicone grease
$5,000.00
In Stock
Direct insertion zirconium oxide oxygen detector for hazardous locations
Starting at
$3,600.00
35mm DIN rail mounting adapter for the Fuji Electric FRENIC-Mini inverter
Starting at
$30.00
Creates a positive force that draws a sample through the high temperature assembly by just using shop air
Starting at
$5,500.00
Converts transistor outputs at Y1 to Y3 on the FRENIC-Eco inverter to relay outputs, three pairs of transfer contacts (SPDT)
$86.00
Connects to PROFIBUS DP master node to read and write all FRENIC-Mega function codes
$980.00
Pulse Generator interface and synchronization cards for FRENIC-Mega inverters
Starting at
$130.00
Connects to PROFIBUS DP master node to read and write all FRENIC-Multi function codes
$355.00
Makes it possible to specify frequency commands with binary code or binary coded decimal (BCD)
$360.00
Connects to a DeviceNet master unit for reading & writing all FRENIC-Mega function codes, run command, and speed command
$1,000.00
Allows users to connect a FRENIC-Mega inverter to a CANopen master unit
$1,300.00
Pulse Generator Feedback Card, A & B Channels, 5 or 12 VDC Signal For FRENIC-Multi
Starting at
$125.00
Print flow rate readings and and other data from the Fuji Electric Portaflow-C ultrasonic flow meter
$1,400.00
With male terminal for alarm output (cable separate)
$25.00
Enclosure that protects inverter to NEMA1 (UL Type 1 listed) standards
Starting at
$55.00
Pair of 16 foot signal cables with male BNC connectors on both ends
$60.00
Enables RS485 communication on Fuji Electric FRENIC-Multi inverters
$85.00
Converts transistor outputs on the FRENIC-Mega inverter to relay outputs, four 1C contacts (SPDT)
$95.00
Enables an inverter to drive two motors equipped with pulse generators in three synchronous operation modes
$215.00
Connect to CC-link master to use run command, speed command, and to access inverter's function codes
$726.00
Enclosure that protects inverter to NEMA1 (UL Type 1 listed) standards
Starting at
$31.00
Mounting adapter that reduces heat radiated or spread inside the panel enclosure
$43.00
Enables other LONWORKS devices in the network to issue commands and monitor the inverter status
$435.00
Connect to CC-link master to use run command, speed command, and to access inverter's function codes
$850.00
Tension springs used with the mounting cable for FLD41 sensors
Call for pricing
Mounting adapter that reduces heat radiated or spread inside the panel enclosure
$41.00
Mounting adapter that reduces heat radiated or spread inside the panel enclosure
$43.00
Mounting adapter that reduces heat radiated or spread inside the panel enclosure
$46.00
Enclosure that protects inverter to NEMA1 (UL Type 1 listed) standards
Starting at
$65.00
Enclosure that protects inverter to NEMA1 (UL Type 1 listed) standards
Starting at
$66.00
Interface card with 8 (115VAC) inputs and 4 (N.O.) relay outputs, DIN rail mountable
$145.00
Program loader for PX series
$170.00
Enclosure that protects inverter to NEMA1 (UL Type 1 listed) standards
Starting at
$185.00
Allows users to specify frequency commands with binary code or binary coded decimal (BCD)
$205.00
Connects to a DeviceNet master unit for reading & writing all FRENIC-Multi function codes, run command, and speed command
$230.00
Connects to a DeviceNet master unit for reading & writing all FRENIC-Eco function codes, run command, and speed command
$330.00
Connect to CC-link master to use run command, speed command, and to access inverter's function codes
$355.00
Enables analog input and output to/from a FRENIC-Mega inverter
$360.00
Connects to PROFIBUS DP master node to read and write all FRENIC-Eco function codes
$516.00
Adds building automation and control network link to FRENIC-Eco inverters for HVAC applications
$529.00
2 MHz strap-on flow sensor for Fuji Electric Time Delta M-Flow ultrasonic flow meter
$724.00
2 MHz strap-on flow sensor for Fuji Electric Time Delta M-Flow ultrasonic flow meter
$749.00