Fuji Electric ZKM-2 Oxygen Analyzer
Starting at $2,025.00

Not in stock. Call for availability [?]

Need Help? Call a Temperature Engineer 1-800-884-4967

We're open Mo-Th 8am to 5:30pm. Fr 8am to 5pm ET


  • Direct insert design, zirconium oxide sensor
  • 0 to 50 vol% O2 (in 1 vol% O2 steps from 2 to 50)
  • Within ±0.5%FS repeatability & ±2%FS linearity
  • 4 to 7sec response time
    • For 90% (from calibration gas inlet)
  • Choice of IP66 (ZKMA) or IP67 (ZKMB) enclosure
  • 4 to 20mA DC or 0 to 1V DC analog output
  • RS485 or HART communication options available

The Fuji Electric ZKM-2 oxygen analyzer utilizes zirconium oxide sensing technology to continuously measure the oxygen concentration in stack gases of industrial boilers and furnaces. It is ideally suited for combustion management and control. Consisting of the signal processor, input/output and communications, display and system controls, the ZKM-2 requires ZFK8 sensors (and cable) to complete the system.

The Fuji Electric ZKM-2 provides a measuring range of 0 to 50 vol% O2 (in 1 vol% O2 steps from 2 to 50). The zirconium oxide sensor technology provides significant benefits over other type analyzers including excellent stability and repeatability. It allows for easy maintenance while eliminating the need for a gas sampling device due to the direct insertion design. Sensor diagnostics, recovery functions and other operation and setting functions can be performed at the converter via an easy-to-use, interactive operation panel. The ZKM-2 is available with either an IP66/NEMA 4 (model ZKMA) or IP67/NEMA 4X (model ZKMB) enclosure.

Fuji ZKM-2 oxygen analyzers are suitable as a combustion controllers for industries with high energy consumption to achieve significant savings in energy cost. The oxygen concentration control ensures complete combustion, thus reducing CO2, SOx, and NOx emissions and helping prevent global warming and air pollution.

Applications for the Fuji Electric ZKM-2 Oxygen Analyzer:

  • Steel
  • Power
  • Petroleum/Petrochemicals
  • Ceramics
  • Paper/Pulp
  • Food
  • Textile industries
  • Breweries
  • Automobile industry
  • Combustion facilities such as garbage incinerators
  • Medium-to-small sized boilers

Required Components

These additional components are required for the operation of your product. We strongly advise you to purchase these components unless you already own them or own a suitable alternative.

Fuji Electric ZFK8 Oxygen Detector
Direct insertion zirconium oxide oxygen detector for non-hazardous applications
Fuji Electric ZRZ Cable
Cable for Fuji Electric Zirconia Oxygen Analyzers


Please consider these optional accessories.

Fuji Electric ZFK Sensor Filters
Replacement filters for Fuji Electric ZFK8 and ZFKE sensors
In Stock
Fuji Electric ZTA Ejector
Creates a positive force that draws a sample through the high temperature assembly by just using shop air