Ashcroft Pulsation Dampener
Brass, steel, or stainless steel material options & 1/4 or 1/2 NPT connection options
Need Help? Call 1-800-884-4967 8:00am to 5:30pm ET
Features
- Threads onto a gauge socket
- Provides restriction by means of a moving pin
- May be used in either a vertical or horizontal position
- Maximum pressure is 5000 psi
This product is an accessory for the following products:
Analog pressure gauge features stainless steel cases & are available in 40, 50, 63 and 100mm sizes
Starting at
$54.96
$41.22
Stainless steel analog pressure gauge for pressures up to 30,000 psi with ±1% full scale accuracy
Bellows gauge for low pressure applications available in 4.5 and 6in dial sizes
Starting at
$450.91
Analog process gauge features 0.5% accuracy & ranges up to 20,000 psi
Starting at
$141.12
Analog pressure gauge with diaphragm sensing element for pressures below 15 psi
Starting at
$48.18
Pressure transmitter with up to 0.25% accuracy designed for heavy industrial applications
Pressure transmitter designed for areas requiring explosion/flame proof approvals
Starting at
$559.70
Pressure transmitter designed for areas requiring intrinsically safe and non-incendive approvals
Starting at
$458.49
Low-pressure transmitters capable of DIN rail or standard panel mounting
Low-pressure transmitters capable of DIN rail or standard panel mounting
Starting at
$424.52
Up to 8 times smaller than a conventional process transmitter with NEMA 4X IP65 aluminum housing
Rangeable wet/wet transmitter for unidirectional & bidirectional pressure measurement
Starting at
$1,026.89
Ultra-low differential pressure transmitter with 0.25% accuracy & high overpressure protection
Starting at
$666.62
Ultra-low differential pressure transmitter with 0.25% accuracy, high overpressure protection & NEMA 2 stainless steel construction
Starting at
$466.98
The Ashcroft Pulsation Dampener threads onto a gauge socket and provides restriction by means of a moving pin, which may be placed in either of five different sized holes, and thus allows the user to vary the amount of dampening to suit requirements. The pulsating pressure moves the pin up and down, providing a self-cleaning action. Dampeners are shipped with a pin in the "middle" hole, and may be used in either a vertical or horizontal position. Maximum pressure is 5000 psi.