Starting at $11,498.00
  • Usually ships in 3-4 weeks



  • Accuracy based on percent of flow rate
    • Mass flow ±0.15%
    • Volume flow ±0.25%
    • Gas flow ±0.50%
  • ±0.002g/cc (±2kg/m3) density accuracy
  • No moving parts to wear or replace
  • Self-draining with a flow path that resists plugging
    • Can be cleaned or sterilized in place (CIP/SIP)
  • -60 to 300ºF (-50 to 150ºC) temp rating
  • 1450 psi (100 bar) pressure rating
  • Titanium ASTM Grade 9 wetted parts
  • EHEDG certified, 3-A authorized, ASME BPE design


The Micro Motion T-Series Coriolis flow meters offer direct inline measurement of mass flow, density, concentration, volume flow and temperature from a single device. They are suitable for installation anywhere with no flow conditioning or where straight pipe run is required and are immune to fluid, process, or environmental effects for superb measurement confidence.

The straight-tube meter design is based on the ASME Bioprocessing Equipment Standard. With optional sanitary fittings, Micro Motion T-Series meters meet 3-A Sanitary Standards for Milk and Milk Products, and are EHEDG clean-in-place approved.

T-series meters are suited for a range of hygienic applications:

  • Batch Control
  • Bio-Reactor Feeds
  • Blending
  • CIP/SIP Processes
  • Concentration and Density Measurements
  • Filling & Dosing
  • Gases
  • High Purity Fluids
  • Mass Balance
  • Oil Field Services Stimulation Fluids
  • Process Control
  • Reactor Charging
  • Validated Processes


Required Components

These additional components are required for the operation of your product. We strongly advise you to purchase these components unless you already own them or own a suitable alternative.

Service Options


Please consider these optional accessories.


This product can be used in the following applications: