Need Help? Call a Calibration Engineer 1-800-884-4967

We're open 8:00am to 5:30pm ET

Features

  • 4 to 20 mA Loop Functions
  • Source and Read 0.000-24.000 mA
  • Simulate 2-Wire Transmitters 0.000-24.000mA
  • Power 2-Wire Transmitters and Read 0.000-24.000 mA
  • Display current in mA or -25.00-125.00 % of 4-20 mA
  • Read 0.00 to ± 30.00 VDC with 4X over range ability
  • Full 5 Digit Display
  • True ±0.012% of reading accuracy
  • Bar graph for quick reference of input and output levels
  • High contrast graphic display viewable in all lighting conditions and angles
  • Easily adjust output by 0.001 mA (0.01%) or 0.100 mA (1.00%)
  • EZ-Check Switch with EZ-Step Button
  • 3-position tactile switch with push button for true one-handed calibrations
  • Push button for stepping through calibration points
  • 6 different step sizes
  • Hands-free auto step and auto ramp modes
  • Uses a standard 9V Alkaline Battery
  • Superior battery life up to 40 hours under typical continuous usage
  • Easy access to battery compartment
  • 240 VAC Tolerant
  • Fuse-less protection from accidental misuse
  • Lightweight and rugged with a solid feel
  • Convenient Velcro hand strap allows for a firm confident grip or attachment to pipes and ladders
  • User selectable 250ohm resistor in series with the output for compatibility with HART protocol enabled devices

The Practical Instrument Electronics (PIE) 530 is the result of 30+ years of experience manufacturing and designing calibrators for the process control industry. Almost all of the Fortune 500 manufacturers use calibrators designed by our engineers. The PIE 530 calibrator incorporates all of this knowledge and experience and combines it into one superior product.

It has simple, easy to use controls featuring a large high contrast display with easy visibility without the need for contrast adjustments. The PIE 530 is designed to be a tool with all the practical functions required to get the job done easily without the confusing extras or reading through a complicated manual. The PIE 530 can source and read current in the process loop and simulate, power and measure 2-wire transmitters. It can read voltage to 30.00 VDC with over 4X over range ability.

PIE AC Adaptor, 120V, 60Hz
PIE AC Adaptor for 530 and 532 Calibrators
$60.00
In Stock
PIE Carrying Case
Carrying case with PIE logo for 530, 532, 535 & 541 Calibrators
$65.00
PIE Certified Test Data for Calibrators and Simulators
$125.00
PIE 020-0236 Magnet and Hanging Strap
Hang your PIE calibrator from racks, cabinets, and from pipes
$19.00