Flo-tech Ultima Sensor Array
Starting at $760.00

Not in stock. Usually ships in 2-4 weeks [?]

Need Help? Call a Flow Engineer 1-800-884-4967

We're open Mo-Fr 8:30am to 5:00pm ET


  • Four flow ranges
  • Turbine flow measurement
  • Standard magnetic pick-up
  • Pressures up to 5800 psi (400 bar)
  • Temperatures up to 300°F (150°C)
  • Available with SAE or BSPP ports
  • Flow accuracy ±1% of full scale
  • Repeatability ±0.2%

The Flo-tech Ultima sensor array provides flow, temperature, and pressure signals in a compact unit that requires only one hydraulic line break. The magnetic pick-up generates a frequency output for flow rate measurement while the pressure and temperature sensors provide 4 to 20mA output signals.

The flow signals can be transmitted to Flo-tech's F6600/F6650 series, and the temperature and pressure signals can be transmitted to the F6700/F6750 series digital displays or any other instruments that accept a frequency or 4 to 20mA signal.

Typical applications include fluid characteristic measurement on test stands, stationary hydraulic system monitoring, feedback for hydraulic system control, advance warning of impending component failure, and mobile hydraulics system diagnosis.

Required Components

These additional components are required for the operation of your product. We strongly advise you to purchase these components unless you already own them or own a suitable alternative.

Flo-tech Cables
Cables for connecting Flotech IFC, Activa, Ultima, Classic & Quad to displays, choice of 6 or 15ft lengths


Flo-tech Calibration Certificate
Five or ten point calibration certificate for the USB hydraulic system analyzer


Please consider these optional accessories.

Flo-tech F6600 / F6650 Series Rate Counter Digital Display
Accepts frequency signals from Flo-tech's Ultima & Classic turbine flow sensors, powered by either an AC or DC power source
Flo-tech F5140 K Factor Scale
Pre-amplifier for low level turbine meters converts low level frequency outputs into square wave output signals
Flo-tech F5141 Programming Software Kit
Makes the Flo-tech F5140 K Factor Scale field adjustable converting frequency output of a turbine meter to a different frequency


This product can be used in the following applications: