Refrigeration Test Equipment
- BRAND
- Bacharach (12)
- Dwyer Instruments (1)
- Extech (1)
- Testo (5)
- Yellow Jacket (24)
- PRICE
- Under $100 (4)
- $100 - $199 (3)
- $200 - $499 (19)
- $500 - $999 (9)
- $1000 - $2499 (6)
- Over $2500 (2)
Showing 1 to 43 of 43 products.
|
Performs accurate temperature, pressure, superheat and sub-cooling measurements on refrigerants
|
Starting at $299.00 $266.11 |
|
Simultaneous superheating and subcooling calculations in real-time, w/ data storage
|
$750.00 $667.50 |
|
Isolation valve for oil changes without losing vacuum in the system, built-in vacuum indicator
|
Starting at $509.40 |
|
Allows pinpoint detection of both refrigerant and combustible gas leaks with the same instrument
|
Starting at $429.00 $386.10 |
|
Built-in pressure/temperature chart reference screen for all refrigerants, Built-in full scale vacuum sensor reads deep vacuum down to 10 microns
|
$890.26 |
|
Refrigeration System Analyzer with built-in vacuum gauge
|
$557.00 $495.73 |
|
Speed, accuracy and portability, dispersive infrared technology for quick results
|
Starting at $1,937.10 |
|
2 stage rotary vane, 8.0 cfm (free air displacement), features a pump exhaust that doubles as an oil fill port
|
$1,188.90 |
|
Maximum air flow and cool running even in high ambient temperatures. High efficiency fan keeps air moving across condenser
|
$642.60 |
|
Advanced infrared technology detects CFC, HFC, HCFC and HFO-1234yf refrigerants with powerful accuracy, 15.5 inch flexible probe
|
$429.00 |
|
Requires no cleaning, best in class accuracy, 1100 to 0 mbar measuring range, IP42 protected
|
$205.00 |
|
Single valve control for easy changeover from liquid to vapor to purge
|
Starting at $996.86 |
|
Easy to use, reliable, and inexpensive refrigerant leak detector
|
$229.00 $206.10 |
|
3/8” ports for faster, high-volume refrigerant recovery, high performance compressor, 550 psi high pressure cut-off
|
Starting at $2,283.00 |
|
Displays 7 different units of vacuum, accuracy: +/- 20% of reading, 12 inch coiled sensor cord stretches to 24 inches
|
$224.04 |
|
Highly efficient, two-stage, rotary vane, oil-sealed vacuum pump, 3, 5 and 7 CFM free air displacement ranges
|
Starting at $393.70 |
|
Reliable leak detection for most refrigerants including all CFC, HFCs and HCFCs
|
$299.00 $266.11 |
|
Compact, 2 cylinder (1hp), oilless air-cooled compressor provides quiet-running performance
|
Starting at $795.00 |
|
Fast twin cylinder 1 hp oil-less compressor recovers direct liquid at up to 5 lbs/min or 0.6 lbs/min vapor
|
$1,986.66 |
|
Non-dispersive infrared (NDIR), single detector with 13 unique filters, R22, R134A, R404A, R407C, R410A, Hydrocarbons, and More
|
$5,295.00 |
|
Forged aluminum alloy body with full 3/8 inch bore for faster vacuum/charging, designed for A/C and refrigeration technicians
|
Starting at $163.39 |
|
Digital and programmable electronic charging scales eliminate refrigerant transfer from tank to cylinder to system
|
Starting at $265.69 |
|
Electrolyte sensor or UV technology to detect HFC, HCFC and HFO refrigerants, including SNAP approved hydrocarbon blends.
|
Starting at $441.00 |
|
Two stage rotary pumps, 1/4" and 3/8" flare and 1/2" ACME intake ports, 1.7 or 5.3 free air displacement
|
Starting at $236.00 |
|
For all A/C systems and lamps, long life LEDs, waterproof, constant on switch
|
Starting at $128.20 |
|
Finger-tight one-piece valve stem for positive seal on nylon seat, cast iron body
|
Starting at $266.23 |
|
Track down the 14 level bargraph from atmosphere to 25 microns to know that the system is clean
|
$159.54 |
|
Fits 30/50-125 lb. cylinders, cycles on/off to maintain surface temperature, comes with 20 inch velcro straps and 6ft cord
|
Starting at $262.40 |
|
Pulls a vacuum much faster than the 1/4 inch hose
|
Starting at $30.97 |
|
1/4 inch hoses, gaskets resist deterioration from existing CFC, HCFC and HFC refrigerants and oils
|
Starting at $61.30 |
|
1, 2, 4 or 6 refrigerant sensors with two levels of detection, 120V/60 Hz or 230V/60 Hz power supply
|
Starting at $721.67 |
|
Thermocouple sensor technology for precise and repeatable accuracy
|
$524.60 |
|
Recovers all commonly used refrigerants, including R-410A (Puron), 550psi high pressure cut-off, LED system status display
|
$1,733.00 |
|
Accurately and reliability weighs refrigerant tanks during charging and recovery operations
|
$258.00 |
|
Low, normal and high sensitivity levels with audible signals to quickly and easily pinpoint leaks
|
$246.00 |
|
detects over 40 of the most commonly used refrigerants and halogen gas compounds and R600a and R290, non-dispersive infrared sensor
|
Starting at $9,050.00 |
|
Combines thermocouple sensor technology with advanced electronics for precise readings and repeatability
|
$302.50 |
|
Non-dispersive infrared (NDIR), dual detectors with dual filters, refrigerants include R12, R134A, R22, R410A and hydrocarbons
|
Starting at $1,999.00 |
|
1/4 inch hoses, hoses have double barrier protection for CFC, HCFC and HFC refrigerants
|
Starting at $45.13 |
|
PLUS II 1/4 inch Hose Set with compact ball valve ends, metal handle at end of hose fits tight areas and traps all the gas
|
Starting at $82.43 |
|
Non-sispersive infrared (NDIR); single detector, PASS/FAIL, 95% Pure R22 accuracy, compact and lightweight
|
$849.00 |
|
Detects all standard refrigerants using a heated diode sensor, LED light at probe tip, LEDs display user-selectable High/Medium/Low levels
|
$229.99 |
|
Audio and visual indication, flexible gooseneck design, detects existing refrigerants including HFC, HCFC, CFC, SF6, R134a, R123
|
$302.00 |
Showing 1 to 43 of 43 products.