Starting at $56.00

Need Help? Call 1-800-884-4967 8:00am to 5:00pm ET

Tap into the potential of your PLC/PAC with Instrumart’s custom pre-programmed solutions. Visit our Programming Services page to see how our team of certified PLC/PAC programmers can help you optimize your automation solution.

Features

  • 48MB per second system bus transfer rate
  • Easy DIN rail mounting & hot-swap capability
    • Only 0.45in (11.5mm) wide
  • Indicator LEDs on the module and each channel
  • Spring style technology for easy wiring

GE Automation RSTi-EP I/O modules connect to and are powered by an RSTi-EP network adapter, up to 64 per adapter. They are compact and high-density modules, with up to 16 inline wire connections.

Digital Input Modules

Available in 4, 8, or 16 inputs, which are primarily used to receive binary control signals from sensors, transmitters, switches, or proximity switches. They are fully compliant with IEC 61131 and compatible with type-1 and type-3 sensor inputs.

Digital Output Modules

Available in 4, 8 or 16 outputs, which are primarily used for the incorporation of decentralized actuators. They are designed for DC-13 discrete outputs according to DIN EN 60947-5-1 and IEC 61131-2 specifications.

Analog Input Modules

Available in 4 or 8 inputs, up to 16-bit resolution, and an accuracy of 0.1% FSR (except EP-3124 which is 0.25% FSR). The parameters for the measurement range can be individually set for each channel. With optional diagnostics selection, you'll get channel specific error messages.

Analog Output Modules

Control up to 4 analog actuators with voltage (±10, ±5, 0 to 10, 0 to 5, 2 to 10, or 1 to 5V) or current (0 to 20 or 4 to 20mA). The resolution is 16-bit per channel. An output can be connected to each connector and the internal switching is carried out automatically. With optional diagnostics selection, you'll get channel specific error messages.

Safe Feed-Input Modules

Available with 1 or 2 inputs for creating safety segments within your RSTI-EP I/O system, rated SIL 3 compliant (IEC 62061 and EN ISO 13849-1, category 4, PL e). They use contact-based safety transducers and/or safety transducers with OSSD (Output Signal Switching Device) inputs to disconnect the 24VDC output current path from all following modules until the next EP-7641 power module. Restoring the supply power to those modules can be set to automatic or manual. With automatic start, the current path is immediately switched on after resetting the safety circuit(s); with manual, you have to hold the start button for a preset length of time.

A delay module option is also available so that you can program some buffer time before shut off (to shut down a machine in a controlled manner, for example). The delay time can be set in four steps between 0 and 60 seconds.

Required Components

These additional components are required for the operation of your product. We strongly advise you to purchase these components unless you already own them or own a suitable alternative.

GE Automation RSTi-EP Network Adapter
Communication gateway with PROFIBUS, PROFINET, EtherCAT, or Modbus protocol that is the base & power for up to 64 active modules
$469.00
In Stock

Accessories

Please consider these optional accessories.

GE Automation RSTi-EP Label Marker
Attaches via swivel connector to the frame of the module creating space to label channels and lines in detail
$2.00
GE Automation RSTi-EP HD Connectors
4-signal high-density I/O connectors (8 plugs per package)
$33.00

Spare Parts

GE Automation RSTi-EP Base Connector
Replacement module piece that holds the module electronics and attaches to the DIN rail as well as other modules
$112.00
In Stock
Part Number Price Available
EP-225F
Show Configuration
Base Price
$56.00
Module Type
Digital output (+$21.00)
Module Description
16-point, Positive Logic, 24VDC, 0.5A & 1-wire (+$89.00)
Reconfigure
$166.00 8
EP-3164
Show Configuration
Base Price
$56.00
Module Type
Analog inputs (+$202.00)
Module Description
4-channel, Voltage/Current, 16-bit & 2-, 3-, or 4-wire (+$24.00)
Reconfigure
$282.00 7
EP-2218
Show Configuration
Base Price
$56.00
Module Type
Digital output (+$21.00)
Module Description
8-point, Positive Logic, 24VDC, 0.5A & 2-wire (+$23.00)
Reconfigure
$100.00 5
EP-3124
Show Configuration
Base Price
$56.00
Module Type
Analog inputs (+$202.00)
Module Description
4-channel, Voltage/Current, 12-bit & 2-, 3-, or 4-wire
Reconfigure
$258.00 5
EP-4164
Show Configuration
Base Price
$56.00
Module Type
Analog outputs (+$280.00)
Module Description
4-channel, Voltage/Current, 16-bit & 2-, 3-, or 4-wire
Reconfigure
$336.00 5
EP-125F
Show Configuration
Base Price
$56.00
Module Type
Digital input
Module Description
16-point, Positive Logic, 24VDC & 1-wire (+$88.00)
Reconfigure
$144.00 4
EP-3704
Show Configuration
Base Price
$56.00
Module Type
Analog inputs (+$202.00)
Module Description
4-channel, RTD, 16-bit, Diagnostics & 2-, 3-, or 4-wire (+$104.00)
Reconfigure
$362.00 4
EP-1318
Show Configuration
Base Price
$56.00
Module Type
Digital input
Module Description
8-point, Positive Logic, 24VDC & 3-wire (+$24.00)
Reconfigure
$80.00 3
EP-3368
Show Configuration
Base Price
$56.00
Module Type
Analog inputs (+$202.00)
Module Description
8-channel, Current, 16-bit, HD connectors & 2-, 3-, or 4-wire (+$139.00)
Reconfigure
$397.00 3
EP-1214
Show Configuration
Base Price
$56.00
Module Type
Digital input
Module Description
4-point, Positive Logic, 24VDC & 2-,3-, or 4-wire
Reconfigure
$56.00 2
EP-1218
Show Configuration
Base Price
$56.00
Module Type
Digital input
Module Description
8-point, Positive Logic, 24VDC & 2-wire (+$24.00)
Reconfigure
$80.00 2
EP-1804
Show Configuration
Base Price
$56.00
Module Type
Digital input
Module Description
4-point, 110/230VAC (65 to 277VAC) & 2-wire (+$64.00)
Reconfigure
$120.00 2
EP-2614
Show Configuration
Base Price
$56.00
Module Type
Digital output (+$21.00)
Module Description
4-point, Positive Logic 24VDC, 2A & 2-,3-, or 4-wire (+$26.00)
Reconfigure
$103.00 2
EP-2634
Show Configuration
Base Price
$56.00
Module Type
Digital output (+$21.00)
Module Description
4-point, Positive/Negative Logic, 24VDC, 2A & 2-,3-, or 4-wire (+$61.00)
Reconfigure
$138.00 2
EP-2714
Show Configuration
Base Price
$56.00
Module Type
Digital output (+$21.00)
Module Description
4-point, Positive Logic, 24 to 220V AC/DC, 6A & 2-wire (+$76.00)
Reconfigure
$153.00 2
EP-2814
Show Configuration
Base Price
$56.00
Module Type
Digital output (+$21.00)
Module Description
4-points, Positive Logic, 230VAC, 1A (+$75.00)
Reconfigure
$152.00 2
EP-3264
Show Configuration
Base Price
$56.00
Module Type
Analog inputs (+$202.00)
Module Description
4-channel, Voltage/Current, 16-bit, Diagnostics & 2-, 3-, or 4-wire (+$39.00)
Reconfigure
$297.00 2
EP-3804
Show Configuration
Base Price
$56.00
Module Type
Analog inputs (+$202.00)
Module Description
4-channel, TC, 16-bit, Diagnostics & 2-, 3-, or 4-wire (+$126.00)
Reconfigure
$384.00 2

Interested in Other Part Numbers?

Other part numbers are available to order but are not currently in stock. Current availability for non-stock parts is "Usually ships in 2-4 weeks". Click here to select options