YELLOW JACKET Refrigerant Sensor Monitor

1, 2, 4 or 6 refrigerant sensors with two levels of detection, 120V/60 Hz or 230V/60 Hz power supply.

Features

  • Factory calibrated for R-404A
  • Mount to any flat vertical surface
  • For point or perimeter detection
  • Dry contact switch; 10 amp at 120/250V max
  • Operating temp: -20 to 122ºF (-29 to 50ºC)
  • Sensor: 4.3 x 2.2 x 0.9 inch (109 x 56 x 23mm)
  • Controller sizes:
    • 1 and 2 sensors; 7.6 x 4 x 3 inch (193 x 102 x 76mm)
    • 4 and 6 sensors; 10.3 x 10 x 3.2 inch (262 x 254 x 81mm)
  • Alarm: 80 dB at 3' (92 cm)
  • Refrigerant monitors and sensors for most common:
    • CFCs, HFCs and HCFCs
    • R-134a, R-404A, R-410A and R-407C

The YELLOW JACKET Refrigerant Sensor Monitor is factory calibrated for R-404A. The controllers and sensors can mount to any flat vertical surface. For point detection mount the sensors near the most likely leak source. For perimeter detection sensors should be set up surrounding the potential leak area. Refrigerant monitors and sensors for most common CFCs, HFCs, HCFCs, R-134a, R-404A, R-410A and R-407C. Should not be used with refrigerants that have an Occupational Exposure Limit of less than 300 ppm. Use 4 conductor, unshielded cable, 22 AWG or larger (0.25 inch O.D. maximum) sensor cable (check your local building code for additional requirements specific to your application).

The YELLOW JACKET Refrigerant Sensor Monitor can be used in the the following environments:

  • Refrigerant storage areas
  • Supermarkets
  • Refrigeration machinery rooms
  • Cold storage facilities
  • Walk-in coolers
  • Marine and fishing fleets
  • Delis, ice cream parlors or quick service stores

This product can be used in the following applications: