Flowline LI40 PodView Local Level Indicator
$210.00

Usually ships in 1-2 weeks [?]

Need Help? Call 1-800-884-4967 8:00am to 5:30pm ET

Features

  • LCD, 6-digit with 4 relay indicator display
  • Three button user interface
  • Operating temp: -4 to 140°F (-20 to 60°C)
  • 4-conductor, #22 AWG 4' (1.2m) cable; polyurethane
  • NEMA 4 (IP65) faceplate enclosure (polycarbonate)
  • No separate power supply required
  • Provides level indication up to 15ft from sensor

This product is an accessory for the following products:

Flowline EchoPod DL10 Ultrasonic Level Transmitter
Continuous non-contact level measurement up to 49.2in (1.25m)
$330.00
In Stock
Flowline EchoPod DL14 Ultrasonic Level Sensor
Non-contact ultrasonic level switch, controller, and transmitter for small tanks
$380.00
In Stock
Flowline EchoPod DL24 Ultrasonic Level Transmitter
Continuous level measurement up to 9.8' (3m) with a 4-20 mA signal output, and is configured via free WebCal software
$480.00
In Stock
Flowline EchoPod DL34 Ultrasonic Level Transmitter
Continuous level measurement up to 18.0’ (5.5m) with a 4-20 mA signal output, and is configured via free Webcal software
$580.00
In Stock
Flowline EchoPod DS14 Ultrasonic Level Switch
General purpose, non-contact ultrasonic level switch and controller for small tanks
$355.00
Flowline EchoPod DX10 Ultrasonic Level Transmitter
General purpose ultrasonic sensor providing non-contact level measurement
$300.00

The Flowline LI40 PodView Local Level Indicator is a low cost general purpose level indicator that displays engineering units for level or volume level readings and shares power with an EchoPod ultrasonic sensor, including loop powered devices. The LI40 can be field mounted for local indication as well as be used to make simple setting changes to the sensor. The display can be easily attached to any EchoPod sensor that has been configured with WebCal 6.0 / firmware 50.0 or higher.

PodView displays sensor output and can reconfigure sensor set points on the fly. PodView draws power from the sensor and does not require any additional outside power supply.

Additional features of the Flowline LI40 PodView Local Level Indicator include:

  • Operates with all EchoPod level sensors compatible with WebCal 6.0 software / firmware 50.0 or higher.
  • No separate power supply required
  • Use PodView to make simple adjustments to the EchoPod's sensor settings
  • Provides level indication up to 15 feet from sensor
  • Corrosion resistant NEMA 4 enclosure
  • No configuration required. Simply wire the display directly to a compatible EchoPod sensor
  • No additional power required
  • Display can be transferred from sensor to sensor without any configuration changes
  • Make quick set point changes without the need to connect back to a PC
Flowline EchoPod DL14 Ultrasonic Level Sensor
Non-contact ultrasonic level switch, controller, and transmitter for small tanks
$380.00
In Stock
Flowline EchoPod DL24 Ultrasonic Level Transmitter
Continuous level measurement up to 9.8' (3m) with a 4-20 mA signal output, and is configured via free WebCal software
$480.00
In Stock
Flowline EchoPod DL34 Ultrasonic Level Transmitter
Continuous level measurement up to 18.0’ (5.5m) with a 4-20 mA signal output, and is configured via free Webcal software
$580.00
In Stock
Flowline EchoPod DL10 Ultrasonic Level Transmitter
Continuous non-contact level measurement up to 49.2in (1.25m)
$330.00
In Stock
Flowline EchoPod DX10 Ultrasonic Level Transmitter
General purpose ultrasonic sensor providing non-contact level measurement
$300.00
Flowline EchoPod DS14 Ultrasonic Level Switch
General purpose, non-contact ultrasonic level switch and controller for small tanks
$355.00