Seametrics PT35 Dual Pulse Timer
Dual counter / timer with optional sequential operation
Need Help? Call 1-800-884-4967 8:00am to 5:00pm ET
- 115 VAC power and output
- 12 VDC sensor power
- 5x7 polycarbonate enclosure
- Accumulator range 1 to 9999 pulses
- Timer range 1 to 9999 seconds
- 1000 Hz maximum input frequency
- Relay contact rating 5 A resistive at 115 VAC, or 1/4 HP
- Temp 32 to 130°F (0 to 55°C)
The Seametrics PT35 Dual Pulse Timer is designed to be used with Seametrics (or similar) meters and flow sensors that produce a pulse signal. It is typically used in water treatment and chemical dosing applications, most often in cooling towers and boilers. The PT35 serves as either a single or a dual timer, depending on whether one or both of its independent accumulators and timers are used.
When the PT35 is used as a single timer, the accumulator counts the pulses coming from the meter. When a pre-set number of pulses has been reached, output power turns on for a set time, and then the cycle repeats.
For applications requiring dual timers (typically, one chemical feed and one water bleed), both accumulators and timers are set to operate independently, even though input is from a single meter or flow sensor. A sequential function can be selected to lock one timer out while the other is operating. This prevents feed and bleed from occurring simultaneously.
The PT35 can be used with dry contact meters, contacting-head meters with solid-state pickups (Seametrics MJE meters), or insertion flow sensors (Seametrics IP, TX, and EX series).
Applications for Seametrics PT35 Dual Pulse Timer
- Water treatment
- Chemical dosing
- Cooling towers