Need Help? Call a Flow Engineer 1-800-884-4967

We're open 8:00am to 5:30pm ET

Features

  • Large backlit LCD displays flow rates and totalizing functions together
  • Simple 10 min setup and easy operation
  • Sound velocity measuring function eliminates temperature and pressure errors, and enables easy setup for unknown materials
  • Enhanced anti-bubble measurement technology
  • Compact and light-weight at 3.3 lbs
  • Built-in data logger with direct download to PC
  • Typical accuracy is ±0.5% to ±1.0% of velocity on calibrated system
  • Variety of detectors for pipes ranging from 0.50" to 235" diameter
This meter requires a sensor purchased separately.
See accessories tab.

The Fuji Portaflow X ultrasonic flow meter utilizes the transit time difference principle for measuring flow rates through pipes from the outside. The Fuji Portaflow X ultrasonic flow meter is compact, portable, and lightweight, incorporating the latest breakthroughs in digital signal processing and electronics. In addition, the Fuji Portaflow X ultrasonic flow meter realizes high performance and easy operation.

One of the most attractive features of the Fuji Portaflow X ultrasonic flow meter is the non-invasive setup, which enables multiple flow measurements of different running systems and offers a significant cost advantage over time.

Some of the most common applications of the Fuji Portaflow X ultrasonic flow meter include: backup for an already installed flow meter system, water supply and sewage treatment, flow measurement systems, boilerwater / feedwater supplies, cooling water, cooling oil, and deionized water for semiconductor manufacturing, among others. The Fuji Portaflow X ultrasonic flow meter may be set up with a wide variety of sensors from small diameters to large diameters, over a wide temperature range.

Transit Time Ultrasonic Flow Meters – Technology Explained

Transit Time ultrasonic flow meters are well-suited for relatively clean fluids with low to moderate aeration. These meters operate by comparing the time for an ultrasonic signal to travel with the flow (downstream) against the time for an ultrasonic signal to travel against the flow (upstream). The difference between these transit times is proportional to the flow, and the flow meter converts this information to flow rate and total. With this technology, the transducers are mounted on the outside of the pipe, providing tremendous advantages over more traditional and invasive flow measurement instruments such as magmeters, vortex meters, and turbine flow meters. These benefits include no system downtime for installation, no system contamination, no pressure drop, no moving parts, and no risk of leaks. This product is virtually maintenance free.

Required Components

These additional components are required for the operation of your product. We strongly advise you to purchase these components unless you already own them or own a suitable alternative.

Accessories

Please consider these optional accessories.

NIST-Traceable Calibration with Calibration Certificate
5-Point NIST-Traceable Calibration for clamp-on ultrasonic flow meters
$450.00
In Stock
Data Logger Software & Cable
Transfer data from your flow meter to your PC, and vice-versa
$75.00
In Stock
FS-200 Ultrasonic Thickness Gauge
Hand-held ultrasonic pipe thickness meter with 5 MHz transducer
$1,300.00
In Stock
Raincover
$75.00
Sonic Coupling Compound
Acoustic couplant gel for use up to 400°F
$15.00
In Stock
Fuji Electric Signal Cable
Pair of 16 foot signal cables with male BNC connectors on both ends
$60.00
Fuji Electric BNC Connectors
Single female-to-female BNC connector
Call for pricing
In Stock