Seametrics MJ Series Pulse Water Meter
Starting at $132.00

Not in stock. Usually ships in 2-3 weeks. Call for expedite options [?]

Need Help? Call a Flow Engineer 1-800-884-4967

We're open 8:30am to 5:00pm ET

For cold or potable water applications you'll need to use the MJN Series Pulse Water Meter.

Features

  • Flow range: 0.22 to 132 GPM
  • Hot water model (194°F maximum temperature)
    Cold water model (105°F maximum temperature)
  • For metering pump pacing or water treatment control
  • Hall-effect sensor, reed switch or totalizer only models
  • Accurate to 1-1/2% of reading
  • Rugged epoxy-coated bronze bodies with union ends
  • 100:1 turndown
  • Wide range of field-changeable pulse rates
  • True dry-top construction

The Seametrics MJ Series pulse water meter is a contacting head water meter which utilizes the multi-jet principle, an internationally-accepted standard for many years. Multi-jet flow meters utilize an impeller which is centered in a ring of jets, with inlet jets on one level and outlet jets on another. This type of meter is known for its wide range, simplicity, and accuracy in low-quality water.

The Seametrics MJ Series pulse water meter is available in sizes ranging from 3/4 to 2 inch. The Seametrics MJ Series pulse water meter is available with flow ranges from 0.22 to 132 gpm (depending upon meter size) with an accuracy of 1-1/2% of reading.

The Seametrics MJ Series pulse water meter is available with a totalizer or pulse outputs. Pulse outputs are either a solid-state, long-lasting Hall-effect sensor, which requires power or a two-wire reed switch which provides a dry contact closure and does not require power. Pulse rates are factory-set to customer specifications but can easily be changed in the field without special tools.

Applications

This product can be used in the following applications: