Seametrics WT Series Turbine Flow Meter
In-line 3 to 8 inch turbine flow meter Replaces ES45-C
Need Help? Call a Flow Engineer 1-800-884-4967
We're open Mo-Th 8am to 5:30pm. Fr 8am to 5pm ET
- 3 to 8 inch meter
- Up to 3000 GPM
- 200 psi max (carbon steel and SS)
- 200°F max
- ±1% FS accuracy
- Turbine rotor is the only moving part, optimizing low-flow performance
- Solid-state pickup
- Electronic register can be meter-mounted or remote
- Available with blind pulse or 4-20 mA output
- Lightweight, corrosion-resistant stainless steel or PVC body
- Flanges or Female NPT threads
The unique Seametrics WT Series turbine flow meter electronically detects and processes rotation of the rotor and is available in sizes from 3 to 8 inches. Because the only moving part is a precision helical rotor, the WT Series is optimized for low-flow. In addition, accuracy is maximized by these in-line, individually-calibrated turbine flow meters.
The WT Series has high quality jewel bearings and polished zirconia ceramic shafts which minimize friction while providing long wear life in non-lubricating fluids. The entire rotor assembly can be easily taken out of this turbine flow meter for field service without removing the meter from the pipe.
The WT Series meter body is fabricated from stainless steel or PVC. The standard turbine insert is either PVC or machined from a stainless steel casting, depending on the model selected. Turbine rotors are Kynar (PVDF).
An electronic register can be mounted on the meter to display flow rate, total (resettable or non-resettable), and provide a programmable pulse output. The same unit, in a wall mount or panel mount housing, can be located up to 2,000 feet away. It is not necessary to have any processing electronics on the Seametrics WT Series turbine flow meter itself unless local reading is desired.
This product can be used in the following applications: