Protimeter
Protimeter offers a product line of handheld moisture meters and hygrometers for professionals. The primary markets for Protimeter’s products are in the building and construction, wood, agriculture, and civil engineering sectors. read more
Building surveyors and inspectors use Protimeter products to measure moisture levels in buildings and to diagnose the cause of moisture related problems. Farmers measure the moisture and temperature levels in harvested crops using Protimeter’s grain moisture meters.
Select a Filter Below
- CATEGORY
- Data Loggers ()
- Humidity Meters / Hygrometers ()
- Infrared Thermometers ()
- Handheld Infrared Thermometers ()
- Moisture Meters ()
- APPLICATION
- ()
- ()
- ()
- ()
- ()
Rapid, non-invasive, and pin moisture evaluation in wood and other building materials
General purpose mini moisture meter
Non-invasive rapid test moisture meter for a wide range of materials
Complete kit for accurate moisture measurement of concrete floor slabs
$1,927.00
$1,734.30
Moisture meter designed specifically for the wood and timber industry with built in calibration scales for 150 wood species
Highly versatile instrument to measure the moisture and temperature of crops
14 to 122°F, 12:1 (D:S), ±3.6°F accuracy, non contact IR temp measurement includes pin moisture, non-invasive moisture & hygrometry
Speedy moisture testers for soils, sands, powders, aggregates, concrete and masonry
Starting at
$1,466.00
Hand-held humidity measurement with psychrometric calculations and a non-contact surface IR temperature probe
Digital pin type moisture meter compatible with a wide range of accessory plug-ins
Includes Surveymaster, Hygromaster2, hammer electrode, and accessories for diagnosing moisture issues in buildings
$1,462.00
$1,315.80
Digital meter for rapid assessment of moisture levels in straw and hay bales
$489.00
$440.10
Handheld meter with built-in psychrometric calculations for faster recordkeeping and reduced calculation errors
Compact device that measures and logs RH, Temperature and Moisture Content in building materials
Take moisture measurements of concrete floor slabs using the relative humidity in-situ probe method
$1,361.00
$1,224.90
Replacement pin needles 1" (25mm) (20 pack)
Insulated 5inch (127mm) probe to measure moisture in walls and other structures regardless of surface dampness or contamination
$73.00
$65.70
Compatible with any Protimeter pin-type moisture meter to locate missing or wet insulation in wall cavities & crawl spaces
$92.00
$82.80
Compatible with any Protimeter pin-type moisture meter to measure behind baseboard moldings without having to remove them
$92.00
$82.80
Replacement HygroStick RH/temperature probes for use with the Hygromaster Thermo-Hygrometer
Starting at
$104.00
$93.60
1 pair of replacement needles for BLD5070 EIFS Probe
$39.00
$35.10
3-Point calibration certification (NIST USA only) for the Hygromaster
$75.00
$67.50
Baleprobe 600mm length for use with i2 Grainmaster moisture meter
$330.00
$297.00
1.5m moisture and temperature probe for use with the Grainmaster
$385.00
$346.50
Extension lead that connects the MMS2 to the Mini Hygrostick
Pack of 10 Hammer Electrode Needles for BLD5055
$92.00
$82.80
Plug-in surface temperature probe, 32 to 158°F (0 to 70°C)
Mini Hygrostik pack of 5 with NIST traceable certificate, specifically designed for the harsh environments found in concrete
$357.00
$321.30
Hygrostick/Humistick extension lead 30" (76cm) long. Allows easier measurement in concrete floors, HVAC ducts and other hard to reach areas
$41.00
$36.90
Grinder blade and plastic feeder ring for use with Grainmaster
$44.00
$39.60
Pack of 10 non-threaded hammer electrode needles
$60.00
$54.00
Humidity Sleeves for the measurement of RH% in concrete slabs (new style: 75mm length x 12mm diameter)
Starting at
$66.00
$59.40
Insulated 9.5inch (240mm) probe to measure moisture in walls and other structures regardless of surface dampness or contamination
$78.00
$70.20
Washer 1/4" BSP sealing adapter for use with Speedy Moisture Sensor
$4.00
$3.60
Washer 7/8" x 7/16" nylon stirrup for use with Speedy Moisture Sensor
$4.00
$3.60
Balance cleaning brush for use with Speedy Moisture Sensor
$7.00
$6.30
Hex L Key 5/32 inch, standard chuck masonry drill bit 3/4 inch, or drill stop collar
Washer 63mm x 45mm x 4 mm neoprene for use with Speedy Moisture Sensor
$7.00
$6.30
Salt calibration check adapter or 75% RH test bottle
Washer 18mm x 10 mm rubber - gauge for use with Speedy Moisture Sensor
$9.00
$8.10
Screw M10 x 8 SK cap HD chrome plated for use with Speedy Moisture Sensor
$9.00
$8.10
3 & 6 inch probe tips for use with Protimeter BLD5035 extension moisture probe
Starting at
$15.00
$13.50
3/4 inch wire brush for cleaning out drilled hole
For placing and removing Mini Hygrostick sensors in and out of the humidity sleeves
Gauge removal tool - new style gauges, 78mm diameter for use with Speedy Moisture Sensor
$25.00
$22.50
12mm concrete drill bit for BLD4750HS sleeves (Hygromaster)
$36.00
$32.40
Scoop calcium carbide polished for use with Speedy Moisture Tester
$40.00
$36.00
Standard adapter type X steel ZP for use with Speedy Moisture Sensor
$40.00
$36.00
For insertion into concrete slabs, adjustable from 4 to 6 inches
Humidity Sleeves for the measurement of RH% in concrete slabs (slotted style: 43mm length x 16mm diameter)
$59.00
$53.10
Allows surface humidity test of %rh on concrete slabs for use with Hygromaster
$67.00
$60.30
Standard stirrup polished for use with Speedy Moisture Tester
$120.00
$108.00
Replacement QuickStick RH/temperature probes for use with the Hygromaster Thermo-Hygrometer
$120.00
$108.00
Allows temperature measurement in wood & automatic temperature compensation when used in conjunction with the Protimeter TimberMaster
Gauge type C2 0-10% 22 PSI for use with Speedy Moisture Sensor
$250.00
$225.00
Gauge type D2 0-20% 22 PSI for use with Speedy Moisture Sensor
$250.00
$225.00
Gauge type G2 0-50% 22 PSI for use with Speedy Moisture Sensor
$250.00
$225.00
Baleprobe 600mm length for use with Balemaster moisture meter
$330.00
$297.00
Kit of all the accessories that come with BLD8800-FL, everything but the MMS2 meter
$834.00
$750.60
Complete standard D2 body 0-20% range for use with Speedy Moisture Sensor
$1,004.00
$903.60
Complete large D2 body, 0-20% range for use with Speedy Moisture Sensor
$1,183.00
$1,064.70