|
Major Megger MJ tester, battery powered, 6 replaceable "AA" alkaline cells
|
|
|
Hand held, 30ft to 15,000ft range, ±1% accuracy, test leads included
|
|
|
Split-box and Cable Locator Energized or de-energized lines tracing, Operating Temp: -5° F to 158° F
|
|
|
Versatile Digital Clampmeter that measures AC/DC current, AC/DC voltage, resistance, and frequency
|
|
|
Cable Route Tracer that determines the depth of any conductive line
|
|
|
Ranges from 30 to 15,000ft; ±1% accuracy; test leads included
|
|
|
< 0.5% error ±2 digits, Six cable measurements
|
|
|
Max reading of 20 GΩ, analog display, four output test voltages
|
|
|
Five models, grounded or ungrounded ac system check
|
Starting at $1,690.00 $1,385.80 |
|
Replacement CAT IV 600 V switched test probe for the MIT400 Series Insulation Tester
|
|
|
10' (3m) lead set with medium 3 kV insulated clips for MIT5/10 Series
|
|
|
Electrode & Soil Resistivity stake and wire kit, winds easily, tough storage case
|
|
|
10' (3m) lead set with 10 kV insulated clips for MIT1020/2
|
|
|
Rugged, molded air pump tests all kinds of rubber gloves
|
|
|
Test Lead set with Croc Clips
|
|
|
Helical spring point leads, Spacing between P and C 0.4in, Max test current 10A
|
Starting at $680.00 $646.00 |
|
33 ft. (10 m) lead set with medium insulated clips [3]
|
|
|
4 x 6 inch (10 x 15 cm) 0 to 2000 MΩ
|
|
|
70 kV high-voltage discharge stick
|
|
|
Spacing between P and C probe tips 0.35in, Max test current 10A
|
Starting at $605.00 $574.75 |
|
Max test current, 7ft in length
|
|
|
Test cables with Kelvin probes 2 x 1.3 m (4 ft), one with trig button
|
|
|
Set of 3 foot leads with alligator clips for MJ testers
|
|
|
High Voltage Probe 4-ft (1.2 m)
|
|
|
Helical Hand spike with current pushbutton switch
|
|
|
5 meter 25 mm2 lead set for the DLRO200
|
|
|
Includes test leads, ground rods, case
|
|
|
Kit includes four leads, hammer, galvanized steel spikes, pair of spike extractors
|
|
|
Clamp capacity 2in, Max test current 10A
anvil insulated from the clamp.
|
Starting at $390.00 $370.50 |
|
33 ft (10 m) lead set, large insulated clips [3]
|
|
|
|
|
|
Fused Test Lead Set (500 mA) with croc clips
|
|
|
15 meter (49ft), 600A, clamps
|
|
|
Chart recorder paper, 100 sheets of kilovolt-megohm paper
|
|
|
Certificate of calibration traceable to the NIST (NBS) at time of order
|
|
|
Kelvin clips 1.5in (4cm), Max test current 10A
|
Starting at $320.00 $304.00 |
|
|
|
|
Test probes with retractable tips, 4 ft
|
|
|
High-voltage probe for ac models 4-ft (1.2 m)
|
|
|
|
|
|
|
|
|
50 ft (15 m) lead set, medium insulated clips [3]
|
|
|
Test cables with Kelvin clamps 4 ft red, 10 ft black
|
|
|
5 m (16.4 ft), comprising 2 x 50 mm2 current leads with clips and 2 potential leads with clips
|
|
|
Set of five slide-in pass-band overlays for BM15 and MJ15
|
|
|
Headset and dongle for PC
|
|
|
Set of two 5-ft (1.5 m) fused leads for BM15 and MJ15
|
|
|
Set of three 10-ft (3 m) leads for BM15 and MJ15
|
|
|
Potential test lead hand spikes
|
Starting at $300.00 $285.00 |
|
|
|