ifm efector LMT Series Level Sensor

Hygienic design for the requirements of the food and beverage industry.

Starting at $374.00

Effective August 12th, 2025, ifm effector has added a 12% surcharge to this product. The surcharge will appear as a separate line item on the order.


View Company Reviews
Manufactured
Includes
Availability
  • Call for availability
Product Specs (16 Files)

Features

  • 11 to 253 mm probe lengths
  • 2 digital outputs
  • -1 to 40 bar tank pressure
  • 18 to 30 DC operating voltage
  • < 50 current consumption
  • < 0.5 response time
  • Oil or water based media
  • For applications in hazardous areas

The ifm efector LMT Series Level Sensor monitors levels in vessels and tanks or ensure run-dry protection of pumps.
Featuring high-quality housing materials such as stainless steel or PEEK as well as hygienic process connections, the sensors are particularly suited for the food and beverage industry. Numerous international approvals or certifications such as EHEDG, 3A and FDA allow the use of the sensors in hygienic applications.
The units can be used in almost all liquids, viscous media and bulk materials. They can detect extremely adhering (e.g. ketchup) or non-conductive media (e.g. vegetable oil). Deposits and foam are suppressed reliably. The device provides two switching outputs that can be set independently of each other so it is even possible to differentiate between two media.
The sensors are offered with different probe lengths.
Each LMT sensor is factory-set to a specific medium. For special requirements, the sensitivity and further functions can be adjusted to the corresponding application. Splashes, wave movements and air bubbles can be compensated by setting a switching delay.
The parameters can be set using a USB interface. The LINERECORDER SENSOR software is used to visualize, transfer and archive parameter sets.

ifm efector E4 Series Level Sensor Welding Adapter
ifm efector E4 Series Level Sensor Welding Adapter

Adapter with high pressure resistance for mounting conductivity level sensors to process lines in industrial and sanitary applications.

Starting at $20.50
ifm efector E4 Series Tri-Clamp Process Adapter
ifm efector E4 Series Tri-Clamp Process Adapter

Stainless steel adapter with high pressure resistance, G1/2 sealing cone sensor connection, and DN25 to DN50 clamp connection.

Starting at $85.50
ifm efector E4 Series Welding Mandrel
ifm efector E4 Series Welding Mandrel

Brass welding mandrel with G1/2 or G1/2 sealing cone connection for dispersing heat during welding.

Starting at $42.00
ifm efector E4 Series T-Piece
ifm efector E4 Series T-Piece

G1/2 sealing cone sensor connection and DN25, DN40, or DN50 process connections for installing level sensors into pipes.

Starting at $155.00
ifm efector E4 Series Variable Clamp Adapter
ifm efector E4 Series Variable Clamp Adapter

Stainless steel adapter with high pressure resistance for sanitary applications in the food and beverage industry.

Starting at $67.00
ifm efector E4 Series IO-Link Data Splitter
ifm efector E4 Series IO-Link Data Splitter

One digital output with switching signal, normally open/closed function, and PNP or NPN electrical design for IO-Link capabilities in old installations.

Starting at $246.50
ifm efector E4 Series EVC843 Y Connection Cable
ifm efector E4 Series EVC843 Y Connection Cable

2m PUR cable with three M12 electrical connections.

$48.00