Erbessd Instruments Phantom Remote Monitoring System - Rental Program
Wireless vibration, temperature, Amperage and RPM monitoring, cloud or local network capability.
- RENTAL DEMO-EPH-K4-EG3
Overview
Features
- Cloud or local network capability
- Accelerometers:
- Triaxial + temperature 10 kHz FMax
- Full waveform and spectrum data
- Programmable internal RMS trigger
- Maximum 6400 lines of resolution
- Amperage Monitoring:
- 3 phases
- 5 to 1000A monitoring range
- 200,000 RPM range
- Temperature Monitoring:
- Thermocouple
- Infrared non contact sensor
- IP67 dust and water proof
What's in the Box
- (4) EPH-V11E High Range Vibration Sensors
- Frequency Range: 0.5 Hz - 10 kHz [x,y], 0.5 Hz - 5.1 kHz [z]
- Dynamic Range: ±8 / ±16 / ±32 g
- Data Receiving Interval: (Configurable) Min: 10 min, Max: 1440 min
- Sensitivity: 100 mV/G
- EPH-GWG2 Gateway
- Wireless Range: 100 line sight
- Access to linked EI Analytic for monitoring purposes and online vibration analysis.
- NEMA 4X/IP68 rated enclosure
- Fiberglass box dimensions (13.3 x 15.3 x 8.2in)
Description
Our rental units can be rented for a week or a month at a time. This unit is ready to use and has all the accessories that someone in the field needs. Contact us today to learn more.
The Erbessd Instruments Phantom Remote Monitoring System integrates other parameters such as temperature, current, RPM and speed into a single diagnosis system. The sensors have a battery life that lasts enough to take up to 100,000 measurements and they are very easy to install. Equally important, the Phantom can send data to a local database or to the cloud-based system, EIAnalytic. At any moment, you can keep track of your machinery using any device such as a smartphone, computer or tablet.
The Phantom Vibration Monitoring System will help you to predict machine failures and save huge amount of costs due to non-programmed down times in production. For example, the following list are the most common failures that can be identified by our condition monitoring system:
- Bearing Failure Stage I, II, III, and IV
- Imbalance
- Shaft and Bearing Wear
- Mechanical Looseness
- Misalignment
- Electrical noise
- Resonance
- Among others
Need Help? Call a Calibration engineer at 1-800-884-4967
We're open 8:00 am to 5:30 pm ET