Need Help? Call a Flow Engineer 1-800-884-4967

We're open 8:00am to 5:30pm ET

Features

  • Dynamic flow correction
  • Simple configuration from front keyboard and menu driven software interface
  • Two digital outputs
  • Enhanced anti-bubble measurement technology (ABM)
  • Rugged and reliable NEMA-6 (IP67) enclosure
  • Maintenance free with no moving parts
  • Long-term reliable operation
  • ±0.5% to ±1.0% accuracy of velocity typical on calibrated system

The fixed Fuji Electric Time Delta S ultrasonic flow meter system is based on the transit time measurement method for measuring flow rates of relatively clean homogeneous liquids. Fuji Electric Time Delta S ultrasonic flow meter systems are composed of a converter and a clamp-on sensor set.

With its microprocessor-based electronics, the Fuji Electric Time Delta S ultrasonic flow meter can be easily configured from the front keyboard to particular applications. Applications of the Fuji Electric Time Delta S ultrasonic flow meter include flow measurement of any fluid through which an ultrasonic signal may be transmitted, including those of unknown sound velocities. The Fuji Electric Time Delta S ultrasonic flow meter is ideally suited for liquid flow measurement for pipe diameters from 0.50 to 235 inches.

Fuji Electric Time Delta S ultrasonic flow meters are compact and lightweight, incorporating the latest electronics and high speed digital signal processing technologies (32 bit MPU). This results in high performance and easy operation.

Benefits of the Fuji Electric Time Delta S Ultrasonic Flow Meter:

  • No system downtime for installation
  • No system contamination
  • No pressure drop
  • No moving parts
  • No risk of leaks

Transit Time Ultrasonic Flow Meters – Technology Explained

Transit Time ultrasonic flow meters such as the Fuji Electric Time Delta S ultrasonic flow meter are well-suited for relatively clean fluids with low to moderate aeration. These meters operate by comparing the time for an ultrasonic signal to travel with the flow (downstream) against the time for an ultrasonic signal to travel against the flow (upstream). The difference between these transit times is proportional to the flow, and the flow meter converts this information to flow rate and total. With this technology, the transducers are mounted on the outside of the pipe, providing tremendous advantages over more traditional and invasive flow measurement instruments. This product is virtually maintenance free.

Required Components

These additional components are required for the operation of your product. We strongly advise you to purchase these components unless you already own them or own a suitable alternative.

Accessories

Please consider these optional accessories.

NIST-Traceable Calibration with Calibration Certificate
5-Point NIST-Traceable Calibration for clamp-on ultrasonic flow meters
$450.00
In Stock
Sonic Coupling Compound
Acoustic couplant gel for use up to 400°F
$15.00
In Stock
FS-200 Ultrasonic Thickness Gauge
Hand-held ultrasonic pipe thickness meter with 5 MHz transducer
$1,300.00
In Stock