Bently Nevada 3500/05 System Rack
Provides continuous, online monitoring suitable for machinery protection applications, full or mini rack mounts
Need Help? Call a Calibration Engineer 1-800-884-4967
We're open 8:30am to 5:00pm ET
- Two racks sizes available:
- 19 inch rack, 14 module slots
- 12 inch rack, 7 module slots
- Panel mount, rack mount or bulkhead mounts available
- Various 3500 modules to communicate
Bently Nevada 3500/05 System Rack holds all 3500 monitor modules and rack power supplies. It allows the various 3500 modules to communicate with one another and the power supplies to distribute power to each module as required. The 3500 racks are available in two rack sizes:
- Full size rack 19-inch EIA rack with 14 available module slots
- Mini rack 12-inch rack with 7 available module slots
The 3500 racks are available in three formats:
The Panel mount format mounts to rectangular cut-outs in panels, and secures to the panel using clamps supplied with the rack. Wiring connections and I/O modules are accessible from the rear of the rack.
The Rack mount format mounts the 3500 rack on 19-inch EIA rails. Wiring connections and I/O modules are accessible from the rear of the rack.
The Bulkhead mount format mounts the rack against a wall or panel when it is not possible to access the rear of the rack. Wiring connections and I/O modules are accessible from the front of the rack. The 3500/05 Mini-Rack is not available in this format.
The Power Supplies and Rack Interface Module must occupy the far left rack positions. The remaining 14 rack positions (7 rack positions for the Mini-Rack) are available for any combination of modules. If you plan to install internal barriers in the 3500 rack, consult our document part number 141495-01, Specifications and Ordering Information for 3500 Internal Barriers.