Megger DET2/3 Digital Ground Resistance Tester
Provides 1mΩ resolution measurements of earth electrode resistance & soil resistivity with remote control option
Need Help? Call a Temperature Engineer 1-800-884-4967
We're open 8:00am to 5:30pm ET
- 1mΩ resolution measurements
- ±3% (±2 digits) accuracy
- Single resistance range 0.01Ω to 1kΩ
- 0.5Hz resolution
- 200mA continuity test currents
- IP54 / IP65 rated
- CAT IV 300V measurement rating
- Stores up to 500 records on board
- Data downloads to PC through USB 2.0
- Long lasting rechargeable battery
- 2-year warranty
What's in the Box
- Calibration checker
- Carry strap
The Megger DET2/3 digital ground resistance tester measures earth electrode resistance and soil resistivity. Four terminal measurements eliminate the resistance of the current circuit from the measurement. As a microprocessor controlled system it is flexible and easy to use, providing excellent error detection and complete test information on a large color display.
Test frequency, test voltage, and filtering adjust easily to prevent adverse conditions from influencing the test. A wide band of test frequencies, with resolution of 0.5Hz, can be used to eliminate errors caused by earth noise. The DET 2/3 includes an automatic frequency selection feature that scans for frequencies with the lowest noise level, running the test at that frequency. Model DET2/3RC offers a remote control feature and GPS.
The DET2/3 is available with the ETK 50C or ETK 100C earth testing kit. The ETK 50C earth testing kit offers an additional MCC1010 current clamp, MVC1010 voltage clamp, calibration checker with clamps, two reels of 50m test cables, two reels of 30m test cables, four test spikes, and two 1.4m leads with connectors and clips.
The ETK 100Cearth testing kit offers an additional MCC1010 current clamp, MVC1010 voltage clamp, calibration checker with clamps, two reels of 100m test cables, two reels of 60m test cables, four test spikes, 100m tape measure, and two 1.4m leads with connectors and clips.