GE Inspection Technologies Angle Beam Transducers
Starting at $325.00

Need Help? Call 1-800-884-4967 8:00am to 5:30pm ET

Features

  • Frequency: 2.25 or 5.0 MHz
  • Diameter:
    • MSW-QC: 0.25 or 0.5 inches
    • AWS: 0.63 x 0.75, 0.63, x 0.63 or 0.75 x 0.75 inches
  • Utilizes interchangeable wedges (sold separately)
  • Maximum versatility and service life
  • AWS models for AWS Structural Welding Code D1.1
    • Have BNC connector, top mount
  • Microdot connector on MSW-QC models
  • Waveform & frequency certification per ASTM E-1065

This product is an accessory for the following products:

GE Inspection Technologies USM 36 Ultrasonic Flaw Detector
Portable, benchtop ultrasonic flaw detector, ergonomic and robust design and the biggest display screen of its class
$7,067.00
GE Inspection Technologies USM Go+ Flaw Detector
Portable ultrasonic flaw detector for operation in the oil & gas, aerospace, power generation & automotive industries
$6,763.00
GE Inspection Technologies USM Go Flaw Detector
Light and portable ultrasonic flaw detector for prolonged operation in the oil and gas, aerospace, power generation and automotive industries
RETIRED

GE Inspection Technologies angle beam transducers are single beam units that are designed for use with the GE Inspection Technologies USM Go flaw detector. These transducers use refraction to transmit shear or longitudinal wave at a predetermined angle and are preferred for parts with inclined flaws, such as welds. Wedges (sold separately) are used to hold the unit at the desired angle. A layer of couplant is required between the transducer and the material being tested.

GE Inspection Technologies angle beam transducers are ideal for general weld inspection as well as identifying flaws on pipes, tanks, pressure vessels, containers, axles, forgings, castings, pumps, valve housings, bridges and other structures, railroad wheels and rail, turbine blades, shafts, wheel rims, and others.

GE Inspection Technologies offers three performance ranges for angle beam transducers:

Gamma Series Features

  • General purpose transducers, recommended for the majority of applications
  • Medium pulse, medium damping—best combination of gain and resolution
  • Matching electrical network ensures maximum gain and optimum waveform for general use
  • Medium bandwidth—typical 6 dB bandwidths range from 30% to 50%
  • Typical Gamma waveform exhibits three to four full ring cycles, depending on frequency, size and other parameters

Benchmark Series Features

  • Proprietary BENCHMARK COMPOSITE® (piezocomposite) active elements
  • Penetration in attenuative materials is far superior to conventional transducers
  • High signal to noise on coarse grain metals, fiber reinforced composites, et al.
  • Short pulse—resolution usually superior to Gamma Series
  • Gain is usually higher than that of the Gamma and Alpha Series
  • Very broadband—typical 6 dB bandwidths range from 60% to 120%
  • Low acoustic impedance element improves performance of angle beam, delay line, and immersion probes—excellent match to plastic and water

Alpha Series Features

  • Recommended for applications where resolution is the primary consideration
  • Suitable for applications such as thickness measurement and near-surface flaw detection
  • Very short pulse—mechanically damped to the limit of current technology
  • Gain is usually lower than that of the Gamma and Benchmark Series
  • Broadband—typical 6 dB bandwidths range from 50% to 100%
  • Typical Alpha waveforms exhibit one to two full ring cycles, depending on frequency, size and other parameters
GE Inspection Technologies Wedges
Precision carbon steel wedges for use with angle beam ultrasonic transducers
$54.00
In Stock

Applications

This product can be used in the following applications:

Part Number Price Available
113-222-591
Show Configuration
Base Price
$325.00
Transducer Type
MSW-QC: Miniature angle beam with quick connect (+$29.00)
Series
Benchmark (+$14.00)
Frequency
2.25 MHz
Diameter
0.25 inches
Reconfigure
$368.00 2

Interested in Other Part Numbers?

Other part numbers are available to order but are not currently in stock. Current availability for non-stock parts is "Call for availability". Click here to select options