Skip to Main Content
Flowline LC82 Remote Flow Controller
Remote Flow Switch, for low-flow pump and process protection, fail-safe relay control of pumps or valves.
Overview
Features
- Models LC80 and LC82 Remote Flow Controllers
- Sensor inputs:
- (2) four-wire flow switches for use with FT10 / GT10
- Fail-safe relay control of pumps or valves with 0-60 second delay
- LED indicators for sensor, power and relay status
- (2) SPDT relays
- Contact rating: 250 VAC @ 10A
- Contact output: selectable NO / NC
- electable ON / OFF
- Contact delay: 0 to 60 seconds
- Sensor supply: 13.5 VDC @ 100 mA
- Supply voltage: 120 / 240 VAC @ 50-60 Hz
- Ambient temp: -40 to 158°F (-40 to 70°C)
- Enclosure type: 35mm DIN rail
- Approvals: CSA, LR 79326
- Consumption: 5 watts maximum
Description
The Flowline LC82 Remote Flow Controllers are offered in two configurations for low-flow pump and process protection. The LC80 accepts one flow sensor input and provides one 10A relay for low flow control. The LC82 accepts two flow sensor inputs and provides two 10A relays for dual low flow control. Package this flow controller with our liquid or gas flow switch sensors. For field mount installation, add a single or dual controller NEMA box.
Additional features of the Flowline LC82 Remote Flow Controllers include:
- Fail-safe relay control of pumps or valves with 0-60 second delay
- Easy setup with LED indicators for sensor, power and relay status
- 35 mm DIN rail mount polypropylene enclosure with removable terminal strips
- Invert switch changes relay state from NO to NC without rewiring
- Connects to all Flowline Flow switches (FT10/GT10)
- Mounts easily in control panel
- Switches loads up to 10Amps including valves, horns, buzzers, etc.
Documents
Accessories
Need Help? Call a Flow engineer at 1-800-884-4967
We're open 8:00 am to 5:30 pm ET
