Kobold KSV Series Flow Meters
Starting at $109.00

Not in stock. Usually ships in 2-3 weeks. Call for expedite options [?]

Need Help? Call 1-800-884-4967 8:00am to 5:30pm ET

Features

  • ±6% Full Scale Accuracy
  • ±1% Full Scale Repeatability
  • Polysulfone version:
    • has excellent resistance to acids & alkaline solutions
    • Can be sterilized (250°F max)
  • Easy to read and to install
  • Convenient panel mountability

The KOBOLD KSV Series Flowmeter is a low volume measuring and controlling device calibrated for flows of water or air. The unit has a plastic body with metal fittings and is kept leak tight through the use of O-ring seals. The floats are either aluminum, stainless steel, glass, or titanium. Though the float types are determined by measuring range, the customer has a choice of plastics for the body and metals for the fittings.The KSV is supplied with or without a needle valve, depending upon the order number. We generally recommend that the needle valve version be used to help stabilize the float during introduction of media (particularly gases) into the flowmeter. As is typical for needle valves, complete shutoff cannot be achieved with our valves. Should complete shutoff be desired, we recommend the installation of a shutoff valve upstream of the KSV.

Combination I

  • Body, float stop: Polycarbonate
  • Connections: Brass
  • Control valve: Brass
  • O-rings: Buna-N
  • Operating temp.: 0°F to + 130°F

Combination II

  • Body, float stop: Polycarbonate
  • Connections: 303 SS
  • Control valve: 303 SS
  • O-rings: Viton
  • Operating temp.: 0°F to + 130°F

Combination III

  • Body, float stop: Polysulfone
  • Connections: Brass
  • Control valve: Brass
  • O-rings: Buna-N
  • Operating temp.: 0 to +250°F

Combination IV

  • Body, float stop: Polysulfone
  • Connections: 303 SS
  • Control valve: 303 SS
  • O-rings: Viton
  • Operating temp.: 0 to +250°F

Applications

This product can be used in the following applications: