Starting at $1,045.00
  • Not in stock. Usually ships in 4-6 weeks

Features

  • Temperature Compensation:
    • 32 to 250°F (0 to 121°C)
  • Pressure Range:
    • 50 psi to 150 psi
  • Process Connection:
    • 1 inch MNPT (front and rear)
  • Wetted Materials:
    • Electrodes; 316 stainless steel
    • Insulators; Tefzel and Viton

The Rosemount Analytical Model 150 Insertion/Submersion Sensor is available in sensor constants of 0.1, 0.5 or 1.0 for conductivity ranges from 0-10 to 0-10,000 μS when used with Models 54eC, 81C, 1054BC, 1181C, 2081C, and 3081C analyzers/transmitters. For optimal loop performance, connect the Model 150 sensor to instrument Models 54eC or 1054BC.

The Tefzel housing has both rear-facing and forward-facing, 1 inch male pipe threads. The sensor can be threaded into a process line or the side of a tank, or be attached to a length of pipe for submersible installation. The Model 150 is available with a 1 inch CPVC tee (Code 16) for flow-through installation. An integral 10 foot cable is supplied for connection to the analyzer/transmitter or junction box.

This sensor is most appropriately used as a set-point detector in applications with a fairly broad control range. This sensor is a good choice for boiler blowdown and open recirculating cooling water. For applications that require high accuracy over a wide range of conductivity, a sensor from the ENDURANCE™ family (Model 400 series) or the toroidal family (Model 200 series) would be the ideal choice.

This product can be used in the following applications: