Megger 247000 / 247001 DLRO
Select options for pricing

Call for availability [?]

instrumart-trustpilot-badge

Need Help? Call 1-800-884-4967 8:00am to 5:00pm ET

Features

  • Resolution as fine as 0.1 µΩ
  • Standard accuracy of ±0.25%
  • Digital readout
  • Broad line of test leads available
  • Kelvin-type, four-wire measurement eliminates errors

The Megger Digital Low Resistance Ohmmeters (DLRO®) are a family of highly accurate instruments that provide a simple, practical, and reliable means of making low-resistance tests in the field. They also are ideal for production quality control. They operate on the four-wire measurement principle, thus eliminating lead and contact resistances. With basic accuracies of ±0.25% and resolution down to 0.1 μΩ, they are nonetheless designed to be rugged and portable for use at the job site. A variety of optional test leads and calibration resistance standards are offered for use with DLROs.

Operation is simple: just connect the leads, turn the instrument on and read the measurement directly from the digital LED display. No warm-up is required.

Applications for the Megger 247001/247001 DLRO:

  • Switch and circuit breaker contacts
  • Transformers and generators
  • Motor windings
  • Busbar and other joints
  • Aircraft, rail and pipe bonds
  • Cable splices, welds and fuses
  • Metal alloys
  • Graphite electrodes and other composites
  • Wire and cable

Two models specially designed for general-purpose testing applications are available. Each provides up to 10 amperes of test current for measuring resistances to 60 ohms with 1 μΩ resolution and ±0.25% accuracy.

Single-Pak General-Purpose Model, Cat. No. 247001 This compact instrument packages measuring circuits, rechargeable batteries and charger in one self-contained unit. Ruggedly built to handle the most demanding field applications, the Single-Pak is housed in a tough Noryl® case with hinged, removable lid and carrying handle. This model also includes captive wing nuts.

Dual-Pak General-Purpose Model, Cat No. 247000 This battery-powered unit features separate measuring and charger modules for maximum portability. The charger can be left in the shop, and the measuring module taken to the job site. It weighs less than 8 pounds (3.6 kg) and provides hours of testing.

***Test leads are not included and must be purchased as accessories.***

Test Leads

Megger 242021 Test Lead Set
Potential test lead hand spikes
Select options for pricing
Megger 242041 Test Lead Set
Current test lead terminal clips, Max test current 10A
Select options for pricing
Megger 242011 Test Lead Set
Helical spring point leads, Spacing between P and C 0.4in, Max test current 10A
Select options for pricing
Megger 242002 Test Lead Set
Spacing between P and C probe tips 0.35in, Max test current 10A
Select options for pricing
Megger 242004 Test Lead Set
Clamp capacity 2in, Max test current 10Aanvil insulated from the clamp
Select options for pricing
Megger 242006 Test Lead Set
Kelvin clips 1.5in (4cm), Max test current 10A
Select options for pricing
Megger 241005 / 242005 Test Lead Set
Kelvin clips 0.5in (1.3cm), gold plate or silver plate options, 7ft of cable
Select options for pricing
Megger 242009 Test Lead Set
Helical Hand spike with current pushbutton switch
Add to Cart for pricing
Megger Replaceable Needle Points
Max test current, 7ft in length
Add to Cart for pricing

Accessories

Please consider these optional accessories.

Megger DH2 Duplex Handspikes
One duplex handspike with helical contacts and 20ft (6m) cable
Add to Cart for pricing
Megger DH1 Duplex Handspikes
Two duplex handspikes with helical contacts and 8ft (2.5m) cables
Add to Cart for pricing
Megger DH3 Duplex Handspikes
One duplex handspike with helical contacts and 29.5ft (9m) cable
Add to Cart for pricing
Megger DH5 Duplex Hand Spikes
Two straight duplex handspikes with spring loaded tips and 8ft (2.5m) cables
Add to Cart for pricing
Megger DH4 Duplex Hand Spikes
Two straight duplex handspikes with spring loaded tips and 4ft (1.2m) cables
Add to Cart for pricing
Megger DH6 Duplex Hand Spikes
Two straight duplex handspikes with spring loaded tips and 4ft (1.2m) cables, rated for CATIII 600V
Add to Cart for pricing