Rosemount RDO Dissolved Oxygen Sensor
Optical dissolved oxygen Pro-X sensor for use with the Rosemount Analytical RDO system.
Effective April 15th, 2025 Rosemount has added a 6.4% surcharge for all of their products. The surcharge will appear as a separate line item on the order.
- By Rosemount
Overview
Features
- Uses the fluorescence quenching method
- Accuracy: ±0.1ppm between 0.0 and 8.0ppm
- ±0.2ppm between 8 and 20ppm
- Low maintenance: sensing cap requires only annual replacement
- Integral 10 meter cable or twist-lock connector option
Description
The Rosemount RDO sensor is for use in wastewater aeration basins and ponds. The sensor uses the fluorescence quenching method so it does not require a flowing sample and is more resistant to fouling than polarographic sensors, an important advantage in wastewater where coating is a common problem. Less sensitivity to fouling means less need for cleaning and reduced operating costs.
The Rosemount RDO sensor has a range from 0 to 20 ppm (mg/L) or 0 to 200% saturation with an accuracy of up to ±0.1 ppm. The sensor is available with either integral or quick disconnect cable. The maximum cable length is 4000 ft (1219 m). A 1-1/4 inch FNPT fitting at the rear of the sensor allows a threaded pipe to be screwed into the sensor so it can be submerged in tanks or basins. Maintenance of the RDO sensor consists primarily of replacing the sensing cap every year. No special tools are required.
Documents
Accessories
Need Help? Call a Flow engineer at 1-800-884-4967
We're open Mo-Th 8am to 5:30pm. Fr 8am to 5pm ET
