FLUKE-741B 120

Fluke

Need Help? Call a Temperature Engineer 1-800-884-4967

We're open Mo-Th 8am to 5:30pm. Fr 8am to 5pm ET

Features

  • Measurements
    • DC Voltage: 0.025% reading + 0.005% Full Scale
    • DC Current: 0.01% reading + 0.015% Full Scale
    • Resistance: 0.05% reading + 50 mΩ
    • Frequency: 0.05%
    • Pressure: To 0.25% of Full Scale (per pressure module specifications)
  • Operating Modes: Measure, Source, simultaneous Measure/Source
  • AutoStep
  • Limit switch calibration procedures
  • Differential pressure flow instrument calibration
  • Built-in algebraic calculator
  • Programmable measurement delay

The Fluke 741B documenting process calibrator is a multi-functional, easy-to-use, calibrator that records and documents your results. Calibrate temperature, pressure, voltage, current, resistance and frequency with the Fluke 741B. Since this Fluke calibrator both measures and sources, you can troubleshoot and calibrate all with one rugged tool. To support your ISO-9000 or regulatory standards, the 741B also captures your calibration results, allowing you to focus on the task at hand while in the field.

The bright white display of Fluke 741B documenting process calibrators let you read results in any kind of light, while the soft keys provide one-touch access to enhanced functions - task lists, automated procedures, scaling, min/max, stepping and ramping and review memory. The three operating modes of the Fluke 741B - measure, source or simultaneous measure/source - enable technicians to troubleshoot, calibrate or maintain instrumentation without switching between tools.

Other features of the Fluke 741B documenting process calibrator include a multi-lingual interface, AutoStep, user entered values and custom units. AutoStep allows technicians to set the calibrator for a delayed start and a specific sequence of steps, so it can run unattended as a continuous varying test source. User entered values enable users to capture readings measured or sourced by other devices, while custom units allow readings to be scaled and displayed in any user-defined units. A built-in algebraic calculator, with four functions plus square root, can store, recall and perform calculations required for setting up instruments, eliminating the need for a separate calculator.

Included Accessories

  • 2 x TL224 industrial test leads
  • 2 x AC220 test clips
  • TP220 test probes
  • BP7217 battery pack
  • BC7217 battery charger
  • Instruction manual
  • NIST traceable calibration certificate & data

Probes

Fluke 80PK-1 Beaded K-Type Probe
39 inch length type-K thermocouple for general purpose applications from -40 to 500°F (-40 to 260°C)
$39.99
In Stock
Fluke 80PK-9 General Purpose Probe
Type-K thermocouple, -40 to 500°F (-40 to 260°C) temperature probe for surface, air, and non-caustic gases
$74.99
Fluke 80PK-24 Air Temperature Probe
SureGrip type-K thermocouple for use in air and non-caustic gas measurements from -40 to 1500°F
$124.99
In Stock
Fluke 80PK-25 Piercing Temperature Probe
SureGrip type-K thermocouple suitable for the food industry, liquids and gels from -40 to 500°F
$124.99
Fluke 80PK-26 Tapered Temperature Probe
SureGrip type-K thermocouple with tapered tip for use in air, non-caustic gas, and surface applications from -40 to 1500°F
$124.99
Fluke 80PK-27 Industrial Surface Temperature Probe
SureGrip type-K thermocouple for flat or slightly curved surfaces from -196.6 to 1112°F
$349.99
$314.99
Fluke 80PK-8 Pipe Clamp Temperature Probe
Type-K thermocouple designed for pipes with 0.25 to 1.375 inch diameters, for -20 to 300°F
$189.99

Calibration

Fluke 700PCK Pressure Module Calibration Kit
Calibrate your pressure modules at your facility using your own precision pressure standards
$1,419.99

Test Leads

Fluke AC220 Alligator Clips
SureGrip clips inlcude one pair (red & black) of small (9.5mm), insulated, nickel plated jaws
$49.99
Fluke AC283 Pincer Clips
One pair of red and black nickel-plated, SureGrip pincers which open to 0.2in (5mm)
$49.99
In Stock
Fluke AC280 Hook Clips
One pair (red & black) of nickel plated clips with SureGrip, hook opening of 6.4mm at the front and 2mm at the base
$39.99
Fluke AC285 SureGrip Alligator Clips
One pair (red & black) of nickel-plated steel jaws with multi-purpose tooth patterns to grip anything from fine gauge wire to a 20mm bolt
$27.99
In Stock
Fluke TL940 Mini-Hook Test Leads
1 pair of test leads with multi-stacking 4mm banana plugs and mini hooks
$29.99
In Stock
Fluke TL950 Mini-Pincer Test Leads
One pair of test leads with multi-stacking 4mm banana plugs and mini-pincers
$49.99
Fluke TP920 Test Probe Adapter Set
Three pairs (red & black) of push-on adapters: IC test adapters, extended probe tips, & alligator clips with 0.3in (7.6mm) max opening
$43.99
In Stock

Current Clamps

Fluke i200 AC Current Clamp
200A AC current clamp with current output and safety shrouded banana plugs
$164.99
Fluke i200s AC Current Clamp
Dual range (20A and 200A) measurement with voltage output, BNC connector, and dual-banana adapter
$264.99

Batteries/Chargers

Fluke BP7235 Ni-MH Battery Pack
7.2V, 3500mAh rechargeable battery pack, charge typically lasts 16 hours
$299.99

Cases

Fluke C789 Soft Case
Large fabric carrying case with 3 compartments, includes removable handle and shoulder strap
$149.99
Fluke C125 Soft Case
Zippered carrying case with detachable external pouch
$41.19
Fluke C550 Tool Bag
Rugged ballistic cloth with heavy duty hardware, including a steel reinforced frame
$109.99
Fluke C700 Hard Case
Blow-molded charcoal gray polyethylene carrying case with textured surface and die-cut polyurethane foam interior
$299.99
Fluke C75 Accessory Case
Zippered, vinyl carrying case with two inside pockets
$28.99
Fluke C781 Meter Case
Zippered carrying case with detachable external pouch
$75.99
In Stock

Accessories

Please consider these optional accessories.

Fluke 700HTH-1 Hydraulic Test Hose
For use in connecting a Fluke-700HTP-1 or other hydraulic test pump to a unit under test
$609.99
$548.99
Fluke 700PMP Pressure Pump
Hand-operated pressure pump for generating pressures up to 150 psi / 1000 kPa
$509.99
$458.99
Fluke 700PRV-1 Pressure Relief Valve Kit
Relief valve, settable from 725 to 5800 PSI (50 to 200 bar) for use with the Fluke 700HTP-1 hydraulic test pump
$709.99
$638.99
Fluke 700PTP-1 Pneumatic Test Pump
Pneumatic test pump capable of supplying pressures up to 600 psi / 40 bar
$799.99
$719.99
Fluke 700TC2 Thermocouple Plug Kit
Mini-plug connectors for Type-E, J, K, T, R/S thermocouples
$109.99
Fluke 700TC1 Thermocouple Plug Kit
A kit of 10 mini-plug connectors
$109.99
Fluke 80CJ-M Type-J Male Mini Connecters
With isothermal screw terminals for attachment to Type-J thermocouple wire, 20 gauge max (2-pack)
$32.99
Fluke 80CK-M Type-K Male Mini Connecters
With isothermal screw terminals for attachment of Type-K thermocouple wire, 20 gauge max (2-pack)
$32.99
Fluke J-Type Extension Wire Kit
9.84ft (3m) of thermocouple wire and 1 pair of male/female mini-connectors for 500°F (260°C) maximum continuous temperature
$64.99
Fluke K-Type Extension Wire Kit
9.84ft (3m) of thermocouple wire and 1 pair of male/female mini-connectors for 500°F (260°C) maximum continuous temperature
$64.99
In Stock