Fluke 114 Electrical Multimeter

Type-K thermocouple, -40 to 500°F (-40 to 260°C) temperature probe for surface, air, and non-caustic gases.

For use with type-K thermocouples in low voltage applications (below 24VAC or 60VDC).

19.5 inch flexible Velcro cuff temperature probe for 302°F (150°C) maximum with 20 inch cable and 0.5in pin connector.

SureGrip electrical test lead set includes alligator clips, test probes, and right to right silicone leads.

SureGrip electrical test lead set includes alligator clips, flat bladed test probes, and straight to right silicone leads.

Comfort grip probes with silicone insulated, right-angle test leads.

One pair (red & black) of nickel-plated steel jaws with multi-purpose tooth patterns to grip anything from fine gauge wire to a 20mm bolt.

One pair (red & black) of flat, right angle design with adjustable collar, provides 2 ranges of jaw openings up to 30mm.

One pair (red & black) of silicone test leads with right shrouded 4mm banana plugs and 2mm probe with 4mm removable lantern tip.

One pair (red & black) of flexible silicone insulated leads with sharp needle point tips adjustable from 0 to 76mm.

One pair (red & black) of 60in silicone-insulated leads, useable from -112 to 158°F (-80 to 70°C).

One pair (red & black) of SureGrip silicone insulated leads with straight connectors on both ends and a pair of female couplers.

Three sets of gold-plated and two sets of stainless steel tips, replacements for TL910 probes.

Three pairs (red & black) of push-on adapters: IC test adapters, extended probe tips, & alligator clips with 0.3in (7.6mm) max opening.

Heavy duty construction with 10 slots for wires up to 0.3 inches (8mm) in diameter.

One pair of red and black nickel-plated, SureGrip pincers which open to 0.2in (5mm).

Pierces 0.01 to 0.06in (0.25 to 1.5mm) insulated wire.

One pair (red & black), for probing high density components or boards.

One pair (red & black), with 0.16in (4mm) banana-style spring contacts and nickel-plated brass ends.

One pair (red & black) of slender, stainless steel probes for accessing closely-spaced or recessed terminals.

Pouch with red & black pairs of test leads, alligator clips, test probes, tip extenders, hook & pinch clips, IC probe tips, & bare spade lugs.

Includes all the SureGrip leads, clips, and probes in a handy roll-up pouch.

Includes small and large SureGrip alligator clips, lantern tip probes, and silicone test leads in a soft case.

Insulated test probes, extenders, and silicone right angle to straight test leads for high energy environments.

Three flexible socket probes and 0.8in (20mm) alligator clip for use on motor and three phase sockets.

0.16 to 0.75 inch (4 to 19mm) adjustable length test tips for use in different measurement environments.

One pair (red & black) of 35.43 inch (90cm) PVC insulated leads with multi-stacking, nickel-plated 0.16 inch (4mm) banana plugs.

One pair (red & black) of 23.62 inch (60cm) PVC insulated leads with multi-stacking, nickel-plated 0.16 inch (4mm) banana plugs.

3 pairs of PVC insulated leads, 23.62, 35.43, & 47.24in (60, 90, & 120cm), with multi-stacking, nickel-plated 0.16 inch (4mm) banana plugs.

CAT IV 600V & CAT III 1000V safety rated clamp with current output and shrouded banana plugs for measuring up to 400A.

CAT IV 600V & CAT III 1000V safety rated clamp with BNC connector for measuring up to 400A.

Dual range (20A and 200A) measurement with voltage output, BNC connector, and dual-banana adapter.

20, 200, and 2000A current ranges with flexible head, voltage output, BNC connector, and banana adapter.

Allows accurate measurement of currents from 100mA to 1000A rms (5Hz to 100kHz) without breaking into the circuit.

30, 300, and 3000A current ranges with voltage output, BNC connector, and dual-banana adapter.

30, 300, and 3000A current ranges with flexible head, voltage output, BNC connector, and banana adapter.

60, 600, and 6000A current ranges with flexible head, voltage output, and BNC connector.

CAT III 300V safety rated current clamp with 30A DC (20A AC) range and banana plug connector.

CAT III 300V safety rated current clamp with 30A DC (20A AC) range.

CAT III 300V safety rated current clamp with 450A DC (300A AC) range.

Zippered carrying case with inside pocket and belt loop.

Unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof.

Adjustable padded space with a moveable Velcro divider for protection of two test tools.

Polyester carrying case with movable internal divider and outer zippered pouch with elastic strap and mesh accessory retainer.

Zippered carrying case with durable vinyl exterior with belt loop and an inner pocket to store test leads or small accessories.

Pen-style non-contact AC voltage detector with LED flashlight.

2 universal hanger clips, hook, 9 inch loop strap, and a strong magnet.

Bright white LED with 120 hours of life on two 3V watch batteries that easily attaches to any Fluke test probe.

TP220 industrial test probes, TP280 probe extenders, TL224 insulated test leads, & L200 probe light in a foldable soft pouch.

L200 probe light, TL71 premium DMM test lead set, and C75 carrying case.

Zippered, polyester carrying case with padding, hand strap & inside pocket.

Durable high-quality polyester, injection molded plastic bottom base, six storage compartments.