Rotronic HygroFlex7-Series Humidity Transmitters
Heavy duty, intelligent humidity and temperature transmitters for the toughest industrial environments
Need Help? Call a Calibration Engineer 1-800-884-4967
We're open Mo-Th 8am to 5:30pm. Fr 8am to 5pm ET
- Integrated probe
- Measures relative humidity and temperature, or humidity only, or temperature only
- Relative humidity range: 0 to 100%RH
- Accuracy: ±1.0%RH
- Temperature range: -100 to 150°C (-148 to 302°F)
- Accuracy: ±0.2°C
- Calculates the dew or frost point
- Metal NEMA 4 / IP65 enclosure
- 2-wire, loop-powered and 3-wire models
- Supply voltage: 10 to 28 VDC (2-wire models) or 15 to 40 VDC / 12 to 28 VAC (3-wire models)
- Analog output signals
- Configurable analog output signals (signal type, parameter and range)
- Automatic RH sensor test with optional sensor drift correction
The Rotronic HygroFlex-7 series of temperature and humidity transmitters are designed for fixed installation in industrial applications. Equipped with a metal enclosure and a metal probe that can survive exposure to temperatures up to 200°C (392°F), the HygroFlex-7 can handle the toughest industrial environments.
Designed for applications where the conditions are within the range of 0 to 100 %RH and -100 to 150°C (-148 to 302°F), the HygroFlex-7 is accurate to ±1.0%RH and ±0.2°C. The HygroFlex-7 transmitter is available in different configurations and has an extensive set of settings and functions that can be configured and enabled with the Rotronic HW4 software after connecting the HygroFlex-7 to a PC. In spite of its sophistication, the HygroFlex-7 can still be used as a simple conventional humidity and temperature transmitter.
The HygroFlex7-series is compatible with HygroClip2 probes with integrated AirChip3000 technology - which achieve a degree of accuracy not seen before. AirChip3000 technology compensates humidity and temperature over 30,000 reference points, has a 2000 data point memory, calculates dew/frost point, has sensor auto-diagnostics and automatic correction. AirChip3000 also includes active alarming and information, as well as ASIC (Application Specific Integrated Circuit); micro-controller and EEPROM on one chip.
The HygroFlex7-series is available in wall and duct mount versions as well as a cable mount version which includes a 2 meter steel cable. Each version includes robust industrial housing. The Hygroflex7-series transmitters have two freely selectable and scalable analog outputs. Units are available as 2-wire or 3/4-wire transmitters. A UART service interface is included.
Rotronic HygroFlex7-series Applications
The HygroFlex7-series is ideal for all applications were exact measurement of humidity and temperature is of decisive importance.
- Heavy industry
- Building management systems
- Underground facilities