Overview

Features

  • Measurement mode:
    • Pulse-Echo (P-E): pit and flaw, 0.025 to 48in (0.63 to 1219.2mm)
    • Pulse-Echo Coating (PECT): material, coating, pit, and flaw, 0.025 to 48in (0.63 to 1219.2mm)
    • Pulse-Echo Temp Comp (PETP): pit and flaw, auto temperature compensation, 0.025 to 48in (0.63 to 1219.2mm)
    • Echo-Echo (E-E): thru paint and coatings, 0.100 to 6in (2.54 to 152.4mm)
    • Echo-Echo Verify (E-EV): thru paint and coatings, 0.100 to 1.0in (2.54 to 25.4mm)
    • Coating Only (CT): coating thickness, 0.0005 to 0.100in (0.0127 to 2.54mm)
  • Resolution: ±0.001in (0.01mm)
  • Velocity range: 0.0122 to 0.7300 inches/μs (309.88 to 18542 meters/sec)
  • Single and two-point calibration option for material and coating, or selection of basic material types
  • Pulser: dual square wave pulsers
  • Receiver: dual receivers, manual or AGC gain control with 110dB range (limited)
  • Timing: precision TCXO timing with single shot 100MHz 8-bit, ultra low power digitizer
  • Pulse repetition frequency: 250Hz
  • 4Gb internal memory
  • USB-C port
  • Factory calibration traceable to NIST and MILSTD-45662A
  • 2-year limited warranty

What's in the Box

  • Transducer (P/N T-102-2900)
  • Couplant
  • Manual
  • Plastic carrying case
  • Certificate of calibration
  • AA Batteries

Description

The Dakota Ultrasonics CMX Series thickness gauge measures material and coating thickness simultaneously, while still detecting pits and flaws in a single mode (PECT). The CMX gauge features auto probe zero, auto probe recognition, and auto temperature compensation. Selectable large digits and B-scan display options, up to 64 custom user-definable setups, selectable transducer table for precision linearity, and material and coating calibration options are also available.

The standard thru paint mode is still included and ongoing. Switch between modes, according the transducer recognized or manually selected. The CMX also offers a 5-position, 12dB gain switch, which allows the user to adjust to certain material types and common but difficult application scenarios. A built-in TDG (time dependent gain) feature is incorporated into the transducer list for use with attenuative materials. The CMX gauge's small, portable extruded aluminum body provides extra durability. The gauge features USB-C connectivity, 4GB internal SD memory with file system, screen capture to .tif, and DakView java-based PC or MAC OSX software.

Accessories

Required Transducers

At least one transducer is required for this product

Accessories

Please consider these optional accessories.