GE Protimeter
GE Protimeter offers a product line of handheld moisture meters and hygrometers for professionals. The primary markets for Protimeter’s products are in the building and construction, wood, agriculture, and civil engineering sectors. see more
Building surveyors and inspectors use Protimeter products to measure moisture levels in buildings and to diagnose the cause of moisture related problems. Farmers measure the moisture and temperature levels in harvested crops using Protimeter’s grain moisture meters.
Protimeter is part of the GE Sensing Division.
- CATEGORIES
- Dewpoint Meters (1)
- Flood Remediation Products (4)
- Humidity Meters / Hygrometers (3)
- Infrared Thermometers (1)
- Moisture Meters (8)
Showing 1 to 50 of 63 products. 12
|
Rapid, non-invasive, and pin moisture evaluation in wood and other building materials
|
$605.00 $544.50 |
|
Speedy moisture testers for soils, sands, powders, aggregates, concrete and masonry
|
Starting at $1,282.00 |
|
Non-invasive rapid test moisture meter for a wide range of materials
|
$402.00 $361.80 |
|
Measures percent RH, temperature and dewpoint
|
Starting at $401.00 $360.90 |
|
General purpose moisture meters
|
$238.00 $214.20 |
|
Four-in-one Moisture Measurement System: pin moisture, non-invasive moisture, non-contact IR temp, and hygrometry
|
Starting at $1,090.00 |
|
|
Mini moisture meters designed specifically for the wood and timber industry
|
Starting at $313.00 $281.70 |
|
Handheld thermo-hygrometer designed to measure humidity and temperature in a wide range of environments and applications
|
$476.00 $428.40 |
|
Digital instrument for rapid assessment of moisture levels in straw and hay bales
|
$471.00 $423.90 |
|
Highly versatile instrument to measure the moisture and temperature of crops
|
$734.00 $660.60 |
| Accessories | ||
|
Replacement HygroStick RH/temperature probes for use with the Hygromaster Thermo-Hygrometer
|
Starting at $90.00 $81.00 |
|
|
Replacement QuickStick RH/temperature probes for use with the Hygromaster Thermo-Hygrometer
|
$154.00 $138.60 |
|
Replacement pin needles 1" (25mm) (20 pack)
|
$29.00 $26.10 |
|
Humidity Sleeves for the measurement of RH% in concrete slabs (new style: 75mm length x 12mm diameter)
|
Starting at $58.00 $52.20 |
|
Heavy Duty Protimeter Hammer Electrode
|
$222.00 $199.80 |
|
Heavy duty two pin moisture probe and lead
|
$55.00 $49.50 |
|
4" (100mm) EIFS Probe
|
$110.00 $99.00 |
|
Two-pin moisture probe and lead
|
$18.00 $16.20 |
|
Hammer Electrode Needles for BLD5055 (pack of 10)
|
$80.00 $72.00 |
|
Humidity Sleeves for the measurement of RH% in concrete slabs (slotted style: 43mm length x 16mm diameter)
|
$52.00 $46.80 |
|
The Protimeter book on dampness diagnosis, treatment and available measurement techniques.
|
$31.00 $27.90 |
|
Allows temperature measurement in wood and automatic temperature compensation when used in conjunction with the Protimeter TimberMaster.
|
$137.00 $123.30 |
|
Hygrostick/Humistick extension lead 30" (76cm) long. Allows easier measurement in concrete floors, HVAC ducts and other hard to reach areas. For use with the Hygromaster.
|
$58.00 $52.20 |
|
Additional sensors for the HygroTrac moisture monitoring system
|
$221.00 $198.90 |
|
Deep Wall Probes - 5" (127mm)
|
$63.00 $56.70 |
|
Calcheck device for pin-type meter range
|
$13.00 $11.70 |
|
Baleprobe 600mm length for use with GRN3000 Grainmaster moisture meter
|
$311.00 $279.90 |
|
Balance cleaning brush for use with Speedy Moisture Sensor
|
$6.00 |
|
|
3-Point calibration certification (NIST USA only) for the Hygromaster
|
$80.00 |
|
Moisture and temperature probe - 1.5m length for use with the Grainmaster
|
$423.00 $380.70 |
|
Additional gateways for the HygroTrac moisture monitoring system
|
$1,466.00 $1,319.40 |
|
12mm concrete drill bit for BLD4750HS sleeves (Hygromaster)
|
$31.00 $27.90 |
|
Allows determination of surface temperature and proximity to dew point. Range 32-122°F.
|
$100.00 $90.00 |
|
1 pair replacement needles for BLD5070 EIFS Probe
|
$34.00 $30.60 |
|
Hammer electrode needles for BLD5000 - pack of 10
|
$52.00 |
|
|
Deep Wall Probes - 9.5" (240 mm)
|
$68.00 $61.20 |
|
|
Complete standard D2 body 0-20% range for use with Speedy Moisture Sensor
|
$878.00 |
|
|
Gauge type G2 0-50% 22 PSI for use with Speedy Moisture Sensor
|
$218.00 |
|
|
Scoop calcium carbide polished for use with Speedy Moisture Tester
|
$35.00 |
|
Grinder blade and plastic feeder ring for use with Grainmaster
|
$54.00 $48.60 |
|
Fast response temperature probe - 1m length - for use with the Grainmaster
|
$134.00 $120.60 |
|
Grinder-Compressor unit for use with Grainmaster
|
$273.00 $245.70 |
|
|
Logging software kit (CD and RS232 interface cable) for BLD7700 series
|
$180.00 $162.00 |
|
|
Baleprobe 600mm length for use with Balemaster moisture meter
|
$311.00 $279.90 |
|
|
Case Speedy plastic and foam insert
|
$320.00 |
|
|
Washer 18mm x 10 mm rubber - gauge for use with Speedy Moisture Sensor
|
$8.00 |
|
|
Steel ball pulveriser, 1-1/4" diameter (30 mm)
|
$18.00 |
|
Allows surface humidity test of %rh on concrete slabs for use with Hygromaster
|
$58.00 $52.20 |
|
|
Standard cap polished for use with Speedy Moisture Tester
|
$53.00 |
|
|
Gauge type D2 0-20% 22 PSI for use with Speedy Moisture Sensor
|
$218.00 |
Showing 1 to 50 of 63 products. 12