Showing 51 to 100 of 107 products. 123
GE Inspection Technologies C-604 Probe Cable
Probe cable with right angle Lemo connector
$75.00
GE Inspection Technologies 47P001 Conductivity Probe
Straight probe with 0.50 inch tip diameter, 60 and 500 kHz frequency for eddy current testing
$918.00
GE Inspection Technologies CA211A Contact Probe
Standard contact probe, 5 MHz, 0.50" diameter
$390.00
GE Inspection Technologies B-320 Calibration Block
4-step block for calibrating thickness range
$188.00
GE Inspection Technologies DA503 Thickness Probe
Standard 2 MHz probe for measuring 0.2 to 12 inches (5 to 300mm) in steel
$500.00
GE Inspection Technologies Calibration Blocks
Calibration blocks for PocketMIKE
Starting at
$188.00
GE Inspection Technologies Li-135 Lithium Poly Battery Pack
$74.00
GE Inspection Technologies USM Go Cables
Cables to connect transducers to GE Inspection Technologies USM Go Flaw Detector
Starting at
$72.00
GE Inspection Technologies Standard Probe Kit
Handheld standard probe for 1, 5 or 10kgf load and includes reference plate, cable and probe handle
Select options for information
GE Inspection Technologies 47A001 Probe Cable
AutoSigma 3000 Probe Cable
$230.00
GE Inspection Technologies Delay Line Transducers
Straight beam, delay line, contact transducers for use with the GE Inspection Technologies USM Go flaw detector
Starting at
$540.00
GE Inspection Technologies ALPHA 2-A MINI-DFR Delay Line Probe
Small diameter delay line probe, 20 MHz, 0.125" diameter
$551.00
GE Inspection Technologies DM5E RUC Rubber Boot
Black rubber boot and hand strap for the DM5E thickness gauge
$121.00
GE Inspection Technologies C123 Probe Cable
4ft armor jacket cable for connecting the DA590 probe to the DM5E
$201.00
GE Inspection Technologies LI-138 Battery
Lithium ion battery
$234.00
GE Inspection Technologies MIC-270A Flat Shoe
Flat shoe for standard hardness tester probes
Call for information
GE Inspection Technologies 47A023 Reference Block
Conductivity set-up block for AutoSigma 3000 Eddy Current Tester
$260.00
GE Inspection Technologies Test Blocks
MIC-D62 or MIC-G38 hardness reference block for hardness testers
Starting at
$768.00
GE Inspection Technologies K-PEN Pencil Probe
Pencil probe, 20 MHz with 0.065" and 0.090" diameter delay tips
$1,053.00
GE Inspection Technologies C-925  Probe Cable
Probe cable with straight Lemo connector
$82.00
GE Inspection Technologies DM5E DL OPT Datalogger Upgrade
Datalogger upgrade for DM5E ultrasonic thickness gauge
$873.00
GE Inspection Technologies Delay Lines
10-pack of delay lines for use with GE Inspection Technologies Delay Line Transducers
Starting at
$64.00
GE Inspection Technologies C-994 USB Cable
$71.00
GE Inspection Technologies ALPHA-2 F Contact Probe
Fingertip contact probe, 10 MHz, 0.25" diameter
$373.00
GE Inspection Technologies Dyna Impact Devices
Dyna D, Dyna G, or Dyna E impact device for rebound hardness testers, with corresponding new impact body
Starting at
$1,558.00
GE Inspection Technologies LiBC-139 Battery Charger
Lithium ion battery charger / AC power supply
$169.00
GE Inspection Technologies DMS Go Thickness Gauge Upgrade
Ultrasonic thickness gauge upgrade for an existing USM Go flaw detector
Starting at
$2,022.00
GE Inspection Technologies PCCBL-841 Serial PC Cable
Interface cable for connecting your datalogging instrument to a computer
$163.00
GE Inspection Technologies MIC-1040 Stand
Instrument carrier and prop-up stand
Call for information
GE Inspection Technologies CH-097 Chest Harness
$119.00
GE Inspection Technologies C120 Probe Cable
4ft cable without armor jacket for connecting the DA590 probe to the DM5E
$248.00
GE Inspection Technologies UltraDAT Software
Hardness data management program that supports the TIV and MIC 20 instruments
Select options for information
GE Inspection Technologies ALPHA DFR-P Delay Line Probe
Plastics delay line probe, 22 MHz, 0.25" diameter
$940.00
GE Inspection Technologies DM5E DM OPT Dual Multi Upgrade
Upgrade for DM5E Basic ultrasonic thickness gauge
$610.00
GE Inspection Technologies Motor Probe Kit
100, 300 or 800 gram load motor probe and includes reference plate, cable and narrow probe guide
Select options for information
GE Inspection Technologies ET-103 4" Quick Change Extension Tube
For use with DA 590 high-temperature probe
$137.00
GE Inspection Technologies AC-944 AC Power Supply
For the CL5 thickness gauge
$261.00
GE Inspection Technologies PCCBL-419 PC Cable
9-Pin Serial Cable to Mini 9D-Sub for the CL5 thickness gauge
$157.00
GE Inspection Technologies Extended Probe Kit
Handheld extended rod probe for 1 or 5kgf load and includes reference plate, cable and probe handle
Select options for information
GE Inspection Technologies PRTCBL-518 Serial Printer Cable
Interface cable for connecting your datalogging instrument to a printer
$206.00
GE Inspection Technologies PCCBL-690 PC Cable
USB serial PC cable to mini 9 D-sub
$248.00
GE Inspection Technologies 0.090" Dia. Tips for K-Pen
Package of 10 tips for K-Pen Pencil Probe
$260.00
GE Inspection Technologies EBC-040 Charger Adapter
External battery charger adapter for lithium ion battery
$416.00
GE Inspection Technologies D-051 0.500 Length Delays
Package of 10 delays for Alpha-2 DFR probe
$64.00
GE Inspection Technologies D-050 0.375 Length Delays
Package of 10 delays for Alpha-2 DFR probe
$64.00
GE Inspection Technologies Dyna 40 Stand
Instrument carrier and prop-up stand
$210.00
GE Inspection Technologies IB-D Impact Body
Replacement impact body for Dyna D impact devices
$838.00
GE Inspection Technologies 47P002 Conductivity Probe
Straight probe with 0.31 inch tip diameter, 500 kHz frequency for eddy current testing
$918.00
GE Inspection Technologies WS-342 Wrist Strap
$119.00
GE Inspection Technologies ET-104 7" Quick Change Extension Tube
For use with DA 590 high-temperature probe
$183.00
Showing 51 to 100 of 107 products. 123