Accurate Thermal Systems FTBLL47 Fluidized Temperature Baths
Fully automatic fluidizing air control, 15.8in x 47in working volume, 200lb cleaning capacity
Need Help? Call a Calibration Engineer 1-800-884-4967
We're open 8:00am to 5:30pm ET
- Fully automatic fluidizing air control
- 15.8in x 47in working volume
- 200lb cleaning capacity
- ±10.0 Stability at 900°F
- 190 minutes heat up time to 900°F
- 300 minute cool down time
- Independent over-temperature protection
- Advanced PID temperature controller
- Cleans most tooling in under 60 minutes
- Removes all types of polymer including:
The Accurate Thermal Systems FTBLL47 Fluidized Temperature Baths offer offer fully automatic fluidizing air control and an advanced PID temperature controller for thermal performance. The FTBLL47 uses a PID temperature controller that has four control zones for improved thermal results. Independent over temperature protection will disable heat if the temperature exceeds 610°C or if the air supply pressure drops below 60 PSI. Fluidizing air is automatically controlled by the system.
The control box is mounted on an articulating arm so it can be moved out of the way for improved access to the bath. The horizontal and vertical position of the arm can be changed as well as angle for easy viewing. It is connected the main control box via a 15 way cable. An air flow meter mounted on the main control box displays Fluidizing air rates.
Thermal cleaning of extrusion tooling including:
- Breaker plates
- Metal filters
- And more
These additional components are required for the operation of your product. We strongly advise you to purchase these components unless you already own them or own a suitable alternative.
Please consider these optional accessories.