Define Instruments TEX-FLO10 Flow Rate Panel Meter
6-digit LED display dual totalizer with optional analog & relay outputs for on/off process control
Need Help? Call 1-800-884-4967 8:00am to 5:30pm ET
- 2Hz to 10KHz input frequency
- Supplies 24VDC excitation (50mA max)
- 0.005% accuracy
- 2ppm/°C typical ambient drift
- Available with up to 4 relay outputs
- Optional RS232 or RS485 serial port
- Optional 4 to 20mA or 0 to 10V analog output
- Available with low or high voltage power supply
- Security PIN protected
- IP65 rated dust & splash proof face
- CE approved & 5-year guarantee
The Define Instruments TEX-FLO10 flow rate panel meter accepts NPN (open collector), PNP, TTL, Namur, Tacho or closed contact sensors. It is ideal for many flow applications including water treatment, irrigation, and level control systems. The dual totalizers convert rate into volume, and offer low flow cutoff, volumetric pulse on setpoints, and batching on Total 1. Volumetric pulse with adjustable pulse width is available on Total 2.
This unit uses input signal averaging to reduce noise and ensure stable measurements. If the change in input exceeds the averaging window value it will not average, ensuring fast response when there are large differences between readings. If your input signal contains large noise spikes you can increase the size of the averaging window to ensure that these are still averaged as well.
The TEX-FLO10 is designed for ease of use with scrolling text prompts that guide you through the setup process and K-factor entry. It will allow you to configure up to 4 setpoints, depending on the number of relays you select. Your settings remain secure with the PIN protection; the input calibration and setpoint functions have independent codes so you can give access to one and not the other.
Interested in Other Part Numbers?
Other part numbers are available to order but are not currently in stock. Current availability for non-stock parts is "Usually ships in 1-2 weeks". Click here to select options