Fluke Calibration 5609 Secondary PRT (formerly Hart Scientific)
-328 to 1238°F inconel 600 sheath material, stable, dry-well reference sensor
Need Help? Call 1-800-884-4967 8:00am to 5:30pm ET
- Inconel 600 sheath material
- -328 to 1238°F (-200 to 670°C) temp range
- ±0.007 at -200°C
- ±0.008 at 0°C
- ±0.020 at 420°C
- ±0.027 at 660°C
The Fluke Calibration 5609 Secondary PRT's are stable thermometers ranging from -328 to 1238°F (-200 to 670°C). Its short-term stability at the triple point of water is only ±7mK and its one-quarter inch (6.23mm) diameter lets you get accurate measurements in only 100 mm of immersion.
The 5609 comes with a one-quarter inch (6.35 mm) diameter sheath in lengths of 12 inches, 15 inches, and 20 inches; or with a 6 mm diameter in lengths of 300 mm, 400 mm, or 500 mm.
When looking for improved response time and reduced stem effect in shallow immersion, look for small diameter probes, because the measurement error called stem effect is caused by the diameter of the stem rather than the length of the stem.
These probes have Inconel sheaths and are made using a special manufacturing process, giving them great precision over a wide temperature range. The sensors for these probes are reference-grade platinum and feature four-wire connections with less noisy measurements than two-wire counterparts.
These probes come with a certificate of compliance to ensure the meet their specifications. If you'd like, you can also order a NVLAP-accredited calibration from our laboratory, lab code 200348-0. On the report of calibration, you'll get the test data and the ITS90 calibration coefficients that you can easily input into any Fluke Calibration thermometer. If you order your probe with an smart connector, we'll program the coefficients directly into your connector, which loads the coefficients for you when you plug it into our 1524 Handheld Thermometer.