Starting at $510.00
  • Not in stock. Usually ships in 2-4 weeks

Features

  • Start/pause/stop, change batch with front buttons
  • Display batch total, rate, grand total, count or preset
  • Single or multi-stage batch control (up to 8 relays)
  • Automatic overrun correction
  • YPP6210:
    • 0-20 mA, 4-20 mA, 0-5 V, 1-5 V, and ±10 V Inputs
  • YPP6310:
    • Pulse, Open Collector, NPN, PNP, TTL,
    • Switch Contact, Sine Wave (Coil), Square Wave Inputs
  • Rate in units per second, minute, hour, or day
  • Automatic or manual batch control
  • Low or high flow alarms while batching
  • 9 Digit grand total with overflow feature
  • Count up or down with each batch
  • Program and control with a computer using PROPLUS software

The Yokogawa PROPLUS YPP6210 / YPP6310 Batch Controllers have front panel has intuitive buttons and displays that make operating the batch controller clear and easy right out of the box. START, BATCH, and STOP buttons come setup by default for batch controller operation. The START button is used to begin a batching process. The BATCH button is used to quickly access the preset value. The STOP button can be pressed once to pause a batch, or twice to cancel a batch in progress. The upper and lower displays can be easily configured for your application need.

The YPP6210 shares some great features common to the ProPlus series. With a variety of analog inputs, it offers single and multi-stage batch control with preclose relays, intuitive front panel, and simple menu navigation. The YPP6210 has excellent but simple batch control capabilities. The preclose deactivates the relay before the batch is finished, to allow slower fill rates and a more accurate batch finish. With expansion module relays, up to eight-stage batching is possible. Each additional stage-batching relay has an individually programmable preclose amount. Automatic overrun correction keeps the batch size accurate, even over time and with system wear.

The YPP6310 shares some great features common to the ProPlus series. With a variety of pulse inputs, it offers single and multi-stage batch control with preclose relays, intuitive front panel, and simple menu navigation. The YPP6310 has excellent but simple batch control capabilities. The preclose deactivates the relay before the batch is finished, to allow slower fill rates and a more accurate batch finish. With expansion module relays, up to eight-stage batching is possible. Each additional stage-batching relay has an individually programmable preclose amount. Automatic overrun correction keeps the batch size accurate, even over time and with system wear.

A PROPLUS batch controller can be programmed for a wide variety of applications. Setup is easy for single or multi-stage batching. Automatic overrun correction keeps the batch size accurate, even over time and with system wear. It can record grand total, or nonresettable grand total with a time base of seconds, minutes, hours or days. The user can program a conversion factor, and configure a non-resettable grand total, and password protection.

The PROPLUS can be used as a single or multi-stage batch controller. Relays assigned to the total act as batch control relays, with additional relays beyond the first including a preclose value. The preclose deactivates the relay before the batch is finished, to allow slower fill rates and a more accurate batch finish. With expansion module relays, up to eight-stage batching is possible. Each additional stage batching relay has an individually programmable preclose amount.

Batches may be started manually with the START front panel button, or with a remote digital input trigger. Batches may also be programmed to start automatically after a 0 to 999.9 second delay after the end of the last completed batch. A manually stopped batch will not automatically restart. The START button or digital input must be used.