Amprobe ACD-15 PRO Clamp-on Multimeter

Digital multimeter measuring AC/DC voltage up to 600 V and AC current up to 2000 A.

Features

  • AC/DC voltage up to 600 V
  • AC current up to 2000 A
  • Resistance
  • Frequency
  • Capacitance
  • Non-contact voltage level detection
  • Audible continuity
  • Auto-check automatically selects DC V, AC V or Resistance (Ω)
  • Auto and manual ranging
  • Auto power off
  • Automatic polarity
  • Low battery indication
  • Data hold
  • Large LCD display
  • Accommodates conductors up to 45 mm (1.77")
  • Voltage overload protection for all functions up to 600 V AC/DC

The Amprobe ACD-15 PRO 2000 A clamp-on multimeter has a wide range of measuring features built into one professional meter. It measures AC/DC voltage up to 600 V, AC current up to 2000 A, resistance, frequency and capacitance. The Amprobe ACD-15 PRO has non-contact votage level detection and audible continuity check. The auto-check feature automatically selects DCV, ACV or resistance (Ω).

Amprobe ACD-15 PRO 2000 A clamp-on multimeters feature auto and manual ranging, auto power off function, automatic polarity detection, low battery indication and a data hold function. The Amprobe ACD-15 PRO has a 3-5/6 digit 6000 count LCD display. The jaws accommodate conductors up to 45 mm (1.77") in diameter and the multimeter has voltage overload protection for all functions up to 600 V AC/DC.

The Amprobe ACD-15 PRO 2000 A Clamp-on Multimeter ships complete with:

  • Test leads
  • Carrying case
  • Manual

Amprobe ACD-15 PRO 2000 A Clamp-on Multimeter Specifications

Feature Range Accuracy
DC Voltage
  6.000 V 0.5% + 3d
  60.00 V 1.0% + 5d
  600.0 V 2.0% + 5d
NMRR: >30 dB @ 50/60 Hz
CMRR: >100 dB @ Dc, 50/60 Hz, Rs=1kΩ
Input impedance: 10 MΩ, 30 pF nominal (1000 MΩ for 400.0 mV range)
Hi-Z DCV Input Impedance: 5 MΩ, 90 pF nominal
AutoCheck Lo-Z DCV input impedance: Initially 1.6 kΩ, 90 pF nominal; impedance increases significantly as display voltage increases from 50 V (typical). Typical impedances vs display voltages for reference are 15 kΩ @ 100 V; 100 kΩ @ 300 V; 210 kΩ @ 600 V
AutoCheck DCV Threshold: > +1.5 V DC or < -1.0 V DC nominal
AC Voltage
50 Hz/60 Hz 6.000 V, 60.00 V 1.5% + 5d
  600.0 V 2.0% + 5d
50 Hz ~ 500 Hz 6.000 V, 60.00 V 2.0% + 5d
  600.0 V 2.5% + 5d
CMRR: >60 dB @ Dc to 60 Hz, Rs=1kΩ
Hi-Z ACV Input Impedance: 5 MΩ, 90 pF nominal
AutoCheck Lo-Z ACV input impedance: Initially 1.6 kΩ, 90 pF nominal; impedance increases significantly as display voltage increases from 50 V (typical). Typical impedances vs display voltages for reference are 5 kΩ @ 100 V; 100 kΩ @ 300 V; 210 kΩ @ 600 V
AutoCheck ACV Threshold: > 2 VAC (50/60 Hz) nominal
Resistance
  6.000 kΩ 2 1.2% + 6d1, 3
  60.00 kΩ, 600.0 kΩ 1.0% + 4d
  6.000 MΩ 2.0% + 4d
Open circuit voltage: 0.4 VDC typical 1Cool down interval 2 minutes after over 50 V measurements in Auto-VΩ position
2Beeper on while reading < 0.025 kΩ
3Add 40d to specified accuracy while reading is
600Ω with Continuity Beeper
  600.0 Ω 2.0% + 8d1
Continuity beeper response: < 100 µs
Open circuit voltage: 0.4 VDC typical
Audible threshold : Between 10 Ω and 300 Ω 1) Add 40d to specified accuracy while reading is below 20% of range
Frequency
Range:
10 Hz ~ 30 kHz
0 Hz ~ 1 kHz
10 Hz ~ 1 kHz		 Sensitivity (Sine RMS)
4 V
30 V
60 V		 Voltage Range:
6.000 V
60.00 V
600.0 V
Accuracy 0.5% + 4d
Max display: 9999 counts
Diode Tester
Open circuit voltage Test current
less than 1.6 V DC 0.4 mA (typical)
Audible threshold: between 0.15 V & 0.080 V
Capacitance
100.0 nF2, 1000 nF 3.5% + 5d1, 3
10.00 µF, 100.0 µF, 2000 µF
1) Accuracies with film capacitor or better
2) Accuracy below 50 nF is not specified
3) Specified with battery voltage above 2.8 V (app. half-full battery). Accuracy decreases gradually to 12% at low battery warning voltage of approximately 2.4 V
Non-contact EF-detection
Typical voltage Bar graph indication
15 V to 85 V -
40 V to 130 V --
60 V to 210 V ---
90 V to 300 V ----
Above 120 V ----
Indication: Bar graph segments & audible beep tones proportional to the field strength
Detection frequency: 50/60 Hz
Detection antenna: Top side of the stationary jaw
Probe-contact EF-detection: For more precise indication of live wires, use the red (+) probe for direct contact measurements
AC current (clamp-on)
50 Hz/60 Hz 400.0 A, 2000 A 1.5% + 5d
1) Add 8d to specified accuracy while reading is below 10% of range
2) Induced error from adjacent current-carrying conductor: < 0.06 A/A
3) Specified accuracy is for measurements made at the jaw center. When the conductor is not positioned at the jaw center, position errors introduced are: Add 1% to specified accuracy for measurements made within jaw marking lines (away from jaw opening) Add 4% to specified accuracy for measurements made beyond jaw marking lines (toward jaws opening)