Pyxis ST-774 Ultra-Low Luminescent Dissolved Oxygen Sensor & Flow Cell

Name: Pyxis ST-774 Ultra-Low Luminescent Dissolved Oxygen Sensor & Flow Cell
Price: 3460.6 USD
Availability: InStock

0.4–2,000µg/L Measurement Range.

$3,460.60

View Company Reviews

Part Number

53715

Manufactured

By Pyxis

Includes

FREE Ground Shipping
FREE Lifetime Tech Support

Availability

Manufacturer has 13 in stock.

Product Manual Product Specs

Features

0.1µg/L (ppb) resolution
±0.3µg/L (ppb) or ±1%, (whichever is greater) accuracy
32-122 °F operating temperature
22-26VDC, Power 0.6W operating voltage
50-500mL/min suggested flow range
145psi (10Bar) working pressure
4-20mA analog
RS-485 Modbus Digital
316L stainless steel material

What's in the Box

ST-774 Dissolved Oxygen Sensor w/4.9ft/1.5m Bulkhead Cable 8Pin
Sulfite-Zero Calibration Kit (P/N – 16019)
DCC-2 Membrane Cap for ST-774 (P/N – 53716)
MA-1.5CR Cable (1.5 Meter/ 4.9 ft 8Pin Female Adapter/Flying Lead) (P/N – 50746)
MA-CR Bluetooth Adapter for 8Pin Sensors (P/N – MA-CR)

The Pyxis ST-774 Ultra-Low Luminescent Dissolved Oxygen Sensor & Flow Cell is an ultra-low range dissolved oxygen (DO) sensor with a lower limit of detection 0.1 ppb ( μg/L). It’s design is based on the principle of fluorescence quenching to determine the partial pressure of the dissolved oxygen in water and incorporates Pyxis' advanced technology in the field of fluorescence detection. The Pyxis ST-774 offers the robustness associated with optical DO sensor technology while achieving the ultra-low detection limit compatible to an amperometric DO sensor. The ST-774 measures the oxygen partial pressure that is at equilibrium with the dissolved oxygen in water governed by Henry’s Law (DO/ppb = K PO2).

The embedded process control board within the ST-774 uses the latest USGS equations to convert the built-in partial pressure and temperature measured to a DO value in ppb (or μg/L).

The ST-774 offers a replaceable, front loading DO membrane cap that has been independently developed by Pyxis Lab, with a typical service life of up to two years. The flat front-end design of the ST-774 makes this platform less prone to contamination or fouling. The sensor body is composed of 316L stainless steel and is well suited for aggressive industrial application use. The ST-774 offers both 4-20mA and RS-485 Modbus outputs and is Bluetooth enabled when used in conjunction with the MA-CR or PowerPACK Series Bluetooth Adapters. This sensor is a fully integrated sensor capable of being used with any receiving controller, PLC or network accepting 4-20mA or RS-485. It may also be purchased on a panel mounted flow assembly with optional UC-50 display/data logger.