MRU 951010 SWG 100 BioGas Analyzer


MRU Instruments

Not in stock. Usually ships in 3-4 weeks [?]

Need Help? Call a Temperature Engineer 1-800-884-4967

We're open 8:00am to 5:30pm ET


  • Measurment ranges:
    • CH4/CO2: 0 to 100%
    • O2: 0 to 25%
    • H2S: 0 to 2,000ppm / 5,000 ppm overload
  • IP54 steel case
  • Integrated condensate trap
  • Solenoid valve for auto-zero
  • 3.5" TFT color display
  • Up to 2 sites monitoring simultaneously
  • Stainless steel flow restrictor orifice
  • Sample gas shut-down solenoid valve

The MRU 951010 SWG 100 BioGas Analyzer is designed for use in the harsh environment of combined heat and power (CHP) engine gas monitoring. The SWG 100 BioGas Analyzer simultaneously monitors up to two sites with one analyzer. The SWG 100 provides accurate measurements of CH4, CO2, O2 and H2S. Measurements are user selectable up to 24 measurements per 24 hours. The IP54 case is built for the harsh environments.

MRU 65128 NDIR Bench for CH4
NDIR bench for CH4, CO2 analysis, 0 to 100% / 0 to 100%
MRU 65419 O2 Module
O2 analysis, 0 to 25%, using long-life electrochemical cell
MRU 66029 RS485 to Profi-Bus converter
RS485 to Profi-Bus converter
MRU 66030 RS485 to Ethernet converter
RS485 to Ethernet converter
MRU Cabinet Heater
Cabinet 200W heater, temperature regulated, for freeze protection at low ambient air temperatures from -20°C to +5°C
MRU 65435 Gas detector
Gas detector (%LEL CH4) to monitor air inside analyzer cabinet
MRU 65427 Flame Arrestor
Flame arrestor with 1/4”ID thread, to be mounted directly on biogas pipe at the sampling point or at sample gas inlet
MRU 11247 Filtered Condensate Catch Pot
Filtered condensate catch pot with automatic draining complete with fittings and canister
MRU 66114 Consumable Parts Set
Consumable parts set for one year operation, set of all filters and required spare parts
MRU 10128 Filter Set
Set of all filters (routine replacement by user)
MRU 65430 Analyzer External Control
Analyzer external control via 4x contacts (relays or open collector transistors)
MRU 65179 I/O Module
I/O Module with 4chanel 4-20mA analog output and 2 alarm relays (fail-safe NO contacts)
MRU 10479 H2S Sensor
H2S electrochemical cell measurement of 0 to 2,000ppm with up to 4,000ppm short time overload