GE Panametrics TransPort PT900 Ultrasonic Flow Meter
Starting at
$6,200.00

Need Help? Call 1-800-884-4967 8:00am to 5:30pm ET

Features

  • A wide selection of transducers for most applications
  • Velocity, volume, mass, totalizer & energy flow capable
  • Fast-responding transmitter with 8GB data storage
  • Requires Android tablet (version 4.4 or newer)
    • Bluetooth communication to transmitter
  • Easy programming with bright touchscreen
    • Multi-language user interface
  • Accuracy assumes a fully developed symmetrical flow
    • ±1% of reading (sizes 2in or greater)
    • ±2% of reading (sizes 0.5 to <2in)
  • ±0.2% of reading repeatability
  • Up to 2Hz response time

What's in the Box

  • Clamping fixture with transducers
  • Flow transmitter (the electronics)
  • OD measuring tape
  • Carrying case

The GE Panametrics TransPort PT900 ultrasonic flow meter maintains the same high performance as the PT878, but features a total redesign of the flow transmitter, clamping fixture and user interface in order to improve the user experience.

The TransPort is portable, simple to use, accurate, and fast. It's easy for you to move it from location to location and task to task, and since it clamps on to the pipe exterior, there's no need to cut into the pipe or stop the process while taking measurements. It is suitable for most pipe sizes and materials, both lined and unlined, and virtually every industry that requires temporary or spot flow rate measurement.

The TransPort's rugged transducers can handle most liquids, from ultra-pure to unfiltered water and refined hydrocarbons to crude oil; it can serve a wide range of applications:

  • Oil & Gas
  • Water & Wastewater
  • Chemical
  • Industrial
  • Power Generation
  • Food & Beverage

Calibration

GE Panametrics PT9 Calibration
PT900 system calibration at United States facility
$400.00

Sensors/Probes

GE Panametrics C-RR Transducers
Pair of clamp-on transducers for medium or large pipes
$1,300.00
In Stock
GE Panametrics CF-LP Transducers
Pair of CF-LP-2EM-40HM-6 (4MHz) transducers for -40 to 446°F applications with 0.5 to 2 inch pipes, includes clamping fixture
$1,800.00

Batteries/Chargers

GE Panametrics PT9 Battery
Spare, rechargable battery for use with PT900
$400.00
In Stock
GE Panametrics PT9 Battery Charger
External charger for PT900 spare battery
$360.00
In Stock

Accessories

Please consider these optional accessories.

GE Panametrics PT900 Tablet
Andriod based touch screen tablet and protective case for United States country of use
$600.00
GE Panametrics PT9-TG Thickness Gauge
Single-hand operation thickness gauge with a 5MHz integrated, exchangeable probe
$1,920.00
GE Panametrics PT9 Energy Kit
Loop-powered temperature transmitter and pair of 4-wire PT1000 surface-mount RTDs to calculate energy flow rate and totalized energy
$1,250.00
In Stock
GE Panametrics PT9 Input & Output Cable
Choice of analog or digital input/output cable for PT900 transmitter
$150.00
In Stock
GE Panametrics PT9 Hard Case
Hard shell carrying case for use with PT900 for durability and transportation
$650.00
In Stock
GE Panametrics C-RR Extension Cable
Pair of 100ft extension cables for C-RR transducers to the PT900
$290.00
GE Panametrics PT9 BNC Adapters
Pair of TNC to BNC adapters for use with C-RS, C-PT, or C-ET transducers and the PT900
$75.00
In Stock
GE Panametrics PT9 UTXDR Adapter
TNC to UTXDR adapter for use with UTXDR transducers and the PT900
$75.00
GE Panametrics PT9 LEMO Adapter
LEMO to BNC adapter for use with submersible cable and the PT900
$75.00
GE Panametrics CRTD Cable
CRTD1000 cable for connecting to the PT900 transmitter
$400.00

Spare Parts

GE Panametrics PT9 Transmitter
Replacement transmitter and mounting straps for the TransPort PT900 system
$6,500.00
GE Panametrics PT9 Soft Case
Replacement soft shell carrying case for use with PT900
$210.00
GE Panametrics C-RR Cable
Replacement 25ft cable for C-RR transducers to the PT900
$235.00
GE Panametrics PT9 Power Cord
Replacement 110/120VAC (NEMA 5-15P) North American power cord
$30.00
GE Panametrics PT9 Power Adapter
Replacement line power adapter (requires power cord ordered seperately)
$165.00
GE Panametrics C-RR Clamping Fixture
Spare PT900 transducer clamping fixture for use with C-RR transducers
$500.00
In Stock
GE Panametrics PT9 SD Card
SD card including latest PT900 tablet application and manuals
$50.00
GE Panametrics PT9 Stylus
Spare stylus for use with PT900 tablet
$25.00
GE Panametrics PT9-OD Measurement Tape
Outer diameter measurement tape in both English and Metric units
$20.00

Application Notes

Here's how some of our customers used this product.

Balancing and Troubleshooting Cooling Water Systems

The Background: The customer is a manufacturer who needs a clamp-on transit time ultrasonic flow meter to help their maintenance department troubleshoot and balance the cooling water systems throughout their plant.

The Problem: The customer sought a unit for which set-up and use was intuitive, making it simple for inexperienced technicians to use correctly, while quickly yielding accurate data.

The Solution: In discussions with the customer, is became clear they were impressed with the several elements of the GE Panametrics PT900 including the newest HMI technologies, the compatibility with heritage transducers, and the tablet interface which makes it easy to view and email data thus increasing the overall efficiency of the maintenance staff.

Specifically, Instrumart quoted and sold the customer a PT9-SYS-1C-A-0-SC. The base Kit "A" allows for easy measurement from 2-24" pipes which easily covered the cooling water applications and allows for possible new applications in the future.

Highlighting Pump Performance

The Background: A pump service/repair shop serving the Oil and Gas Industry is looking for a unit to highlight the system performance recovered by their service work to their customers.

The Problem: The customer requires a highly portable solution with fast and easy set-up and operation. As their customers are primarily in the oil and gas field, compatibility with hydrocarbons is a must.

The Solution: The PT900 was quoted due to its high level of performance on hydrocarbon applications, and the Tablet interface which allows a clean interface for their sales representative to showcase the improvement. The customer purchased model PT9-SYS-1C-1-A-0-SC as they were looking to meter within the 2-24" range.

Testing a Pipeline for Expected Performance

The Background: Our customer is a military testing facility that is in the midst of building a 20 mile long pipeline and are currently assessing expected performance of that pipeline by logging flow rates over a few days with varying loads under varying conditions.

The Problem: As this is testing, there is no desire to tap into the pipeline so the meter must be a clamp-on type. The length of the pipeline means it will be far removed from a power source. The remoteness will also require a rugged and reliable device.

The Solution: The GE Panametrics PT900 ultrasonic flow meter is portable, simple to use, accurate, and fast. It's easy to move from location to location and task to task, and since it clamps on to the pipe exterior, there's no need to cut into the pipe or stop the process while taking measurements. The PT900 also has a long battery life and interfaces easily with tablets.

Part Number Price Available
PT9-SYS-1C-1-A-0-SC
Show Configuration
Base Price
$6,200.00
Model
1-channel
Transducer Kit 1
Kit A: for 2 to 24in pipes, -40 to 302°F, pair of C-RR-592 (1MHz) (+$1,750.00)
Transducer Kit 2
Only available with 2-channel model
Carrying Case
Soft
Pipe Wall Thickness Gauge
Not included
Energy Kit
Not included
C48 Clamping Fixture
Not included
Analog Input/Output Cable
Not included
Digital Input/Output Cable
Not included
Rechargable Battery
1 included
External Battery Charger
Not included
Extension Cable
Not included
Reconfigure
$7,950.00 14
PT9-SYS-1C-1-0-0-SC
Show Configuration
Base Price
$6,200.00
Model
1-channel
Transducer Kit 1
Not included (Note: Transducer kit is required for a functioning system)
Transducer Kit 2
Only available with 2-channel model
Carrying Case
Soft
Pipe Wall Thickness Gauge
Not included
Energy Kit
Not included
C48 Clamping Fixture
Not included
Analog Input/Output Cable
Not included
Digital Input/Output Cable
Not included
Rechargable Battery
1 included
External Battery Charger
Not included
Extension Cable
For C-RR transducers only
Reconfigure
$6,200.00 10
PT9-SYS-1C-1-G-0-SC
Show Configuration
Base Price
$6,200.00
Model
1-channel
Transducer Kit 1
Kits A & B: for pipes 0.5 to 24in, pair of C-RR & pair of CF-LP (+$2,960.00)
Transducer Kit 2
Only available with 2-channel model
Carrying Case
Soft
Pipe Wall Thickness Gauge
Not included
Energy Kit
Not included
C48 Clamping Fixture
Not included
Analog Input/Output Cable
Not included
Digital Input/Output Cable
Not included
Rechargable Battery
1 included
External Battery Charger
Not included
Extension Cable
For C-RR transducers only
Reconfigure
$9,160.00 6
PT9-SYS-1C-1-A-0-HC
Show Configuration
Base Price
$6,200.00
Model
1-channel
Transducer Kit 1
Kit A: for 2 to 24in pipes, -40 to 302°F, pair of C-RR-592 (1MHz) (+$1,750.00)
Transducer Kit 2
Only available with 2-channel model
Carrying Case
Hard (+$650.00)
Pipe Wall Thickness Gauge
Not included
Energy Kit
Not included
C48 Clamping Fixture
Not included
Analog Input/Output Cable
Not included
Digital Input/Output Cable
Not included
Rechargable Battery
1 included
External Battery Charger
Not included
Extension Cable
Not included
Reconfigure
$8,600.00 5
PT9-SYS-1C-1-C-0-SC
Show Configuration
Base Price
$6,200.00
Model
1-channel
Transducer Kit 1
Kit C: for pipes 6in & larger, -40 to 302°F, pair of C-RR-591 (0.5MHz) (+$1,750.00)
Transducer Kit 2
Only available with 2-channel model
Carrying Case
Soft
Pipe Wall Thickness Gauge
Not included
Energy Kit
Not included
C48 Clamping Fixture
Not included
Analog Input/Output Cable
Not included
Digital Input/Output Cable
Not included
Rechargable Battery
1 included
External Battery Charger
Not included
Extension Cable
Not included
Reconfigure
$7,950.00 3
PT9-SYS-2C-1-A-A-SC
Show Configuration
Base Price
$6,200.00
Model
2-channel (+$900.00)
Transducer Kit 1
Kit A: for 2 to 24in pipes, -40 to 302°F, pair of C-RR-592 (1MHz) (+$1,750.00)
Transducer Kit 2
Kit A: for 2 to 24in pipes, -40 to 302°F, pair of C-RR-592 (1MHz) (+$1,900.00)
Carrying Case
Soft
Pipe Wall Thickness Gauge
Not included
Energy Kit
Not included
C48 Clamping Fixture
Not included
Analog Input/Output Cable
Not included
Digital Input/Output Cable
Not included
Rechargable Battery
1 included
External Battery Charger
Not included
Extension Cable
Not included
Reconfigure
$10,750.00 3
PT9-SYS-1C-1-A-0-SC-C48
Show Configuration
Base Price
$6,200.00
Model
1-channel
Transducer Kit 1
Kit A: for 2 to 24in pipes, -40 to 302°F, pair of C-RR-592 (1MHz) (+$1,750.00)
Transducer Kit 2
Only available with 2-channel model
Carrying Case
Soft
Pipe Wall Thickness Gauge
Not included
Energy Kit
Not included
C48 Clamping Fixture
1 additional assembly for mounting on 24 to 48in pipes (+$100.00)
Analog Input/Output Cable
Not included
Digital Input/Output Cable
Not included
Rechargable Battery
1 included
External Battery Charger
Not included
Extension Cable
Not included
Reconfigure
$8,050.00 1
PT9-SYS-2C-1-G-A-SC
Show Configuration
Base Price
$6,200.00
Model
2-channel (+$900.00)
Transducer Kit 1
Kits A & B: for pipes 0.5 to 24in, pair of C-RR & pair of CF-LP (+$2,960.00)
Transducer Kit 2
Kit A: for 2 to 24in pipes, -40 to 302°F, pair of C-RR-592 (1MHz) (+$1,900.00)
Carrying Case
Soft
Pipe Wall Thickness Gauge
Not included
Energy Kit
Not included
C48 Clamping Fixture
Not included
Analog Input/Output Cable
Not included
Digital Input/Output Cable
Not included
Rechargable Battery
1 included
External Battery Charger
Not included
Extension Cable
Not included
Reconfigure
$11,960.00 1

Interested in Other Part Numbers?

Other part numbers are available to order but are not currently in stock. Current availability for non-stock parts is "Call for availability". Click here to select options