Mercoid PBLT2 and PBLTX Level Transmitters
Starting at $405.00

Usually ships in 8-14 weeks [?]

Need Help? Call 1-800-884-4967
Mo-Th 8am to 5:30pm. Fr 8am to 5pm ET

Features

  • Excellent chemical compatibility with 316 construction and ETFE cable
  • Lightning and surge protection on PBLT2 models
  • Maintenance free vent filter
  • UL approved intrinsically safe on PBLTX models
  • Large diameter, non-clogging, damage resistant, 316 SS diaphragm seal
  • Accuracy: ±0.25% full scale (includes linearity, hysteresis, and repeatability)
  • Temperature Limit:
    • PBLT2: 0 to 200°F (-18 to 93°C)
    • PBLTX: 0 to 176°F (-18 to 80°C)
  • Compensated Temperature Range:
    • PBLT2: 0 to 180°F (-18 to 82°C)
    • PBLTX: 0 to 176°F (-18 to 80°C)
  • Thermal Effect: ±0.02% FS/°F
  • Pressure Limit: 2X full scale
  • Output Signal: 4 to 20 mA DC, two wire
  • Electrical Connection: Wire pigtail
  • Mounting Orientation: Suspended in tank below level being measured
  • Agency Approvals (PBLTX): CE, cUL, UL intrinsically safe for Class I, Div. 1, Groups A, B, C, D; Class II, Div. 1, Groups E, F, G; Class III, Div. 1

Mercoid PBLT2 and PBLTX submersible level transmitters are manufactured for years of trouble free service in the harshest applications. Both measure the height of liquid above the position in the tank referenced to atmospheric pressure. The transmitter consists of a piezoresistive sensing element, encased in a 316 SS housing. Perfect for wastewater and slurry applications with features to protect the unit from these demanding applications. Large diameter 316 SS diaphragm seal is non-clogging and damage resistant to floating solids.

The PBLT2 incorporates lightning and surge protection utilizing dual arrestor technology, grounded to case, eliminating both power supply surges and lightning ground strike transients (surge protection is not guaranteed and is not covered by warranty). The PBLTX is UL approved intrinsically safe for use in hazardous locations when used with proper barrier.

Units come equipped with a 270-pound tensile strength shielded and vented cable. Ventilation tube in the cable automatically compensates for changes in atmospheric pressure above the tank. The vent is protected with a maintenance free filter eliminating particulate or water droplets from entering the transducer.

Dwyer A-297 Desiccant Vent Filter
Desiccant vent filter for submersible level transmitters
$19.00
Dwyer A-625 Lift Loop / Hanger
Lift loop / hanger for submersible level transmitters
$25.00
Dwyer MTL5041 Galvanic Barrier
Intrinsically safe isolators for hazardous locations
$790.00
Dwyer MTL7706 Zener Barrier
Intrinsically safe barriers for hazardous locations
$418.00
FloCat STE-DISP Sensor Termination Enclosure with Display
Compatible with any manufacturer's transmitter & moisture protection method, outputs preprogrammed by Instrumart at no cost
$500.00
In Stock

Applications

This product can be used in the following applications: