Megger MJ15 Insulation Testers
Hand crank or battery powered, Max reading of 20 GΩ, four output test voltages
Need Help? Call 1-800-884-4967 8:00am to 5:00pm ET
- Rechargeable Battery/Hand-cranked
- Large, single scale analog display
- Auto voltage measurement function
- Safety recessed terminals and long connectors
- Four output test voltages
- Dual power supply option on MJ15
- Test Voltages (DC): 500V, 1000V, 2500V & 5000V
- Insulation Range: 100 kΩ to 20 GΩ
- Voltage Range: 0 to 600 VAC
- Test Voltage Accuracy: ±5%
The Megger MJ15 is a compact 5kV insulation tester. It is are very simple to use and provide a quick and accurate reading of insulation resistance. The instrument uses an analogue display with a maximum reading of 20 GΩ. The BM15 is powered by batteries.
The instrument operation is extremely simple. A voltage range enables measurement of a.c. or d.c. conductor potential. Four test voltages are available at 500 V, 1 kV, 2,5 kV and 5 kV. A choice of push buttons is supplied; a locking button simplifies long term testing, or a non-locking version is preferred for maximum safety.
A bezel allows a scale plate overlay to be added with pass/fail bands for go/no go testing. This is particularly useful for less experienced users and enables a rapid decision to be made.
The MJ15 comes with a hand cranked generator plus batteries. If the test button is pressed the MJ15 uses battery power. Otherwise the crank handle is turned to save battery power or for use when the batteries are unavailable.
The MJ15 is built into a rugged case designed for outdoor use. The instrument are also supplied with a soft carrying case, a test lead set, test record cards and batteries.
Insulation is important for the safety of all electrical systems, providing a barrier to hazardous live conductors. Insulation can deteriorate due to the affects of moisture, sunlight and heat. A reduction in the value of insulation resistance can lead to a potentially dangerous situation caused by the dangers of electric shock, or arcing causing fire. If insulation resistance is regularly monitored unusually low values can be investigated before they cause danger, or inconvenience and cost due to equipment downtime for repairs.
The MJ15 is a general purpose, 5kV insulation testers for electrical contractors and engineers who test machinery, transformers, switchgear, cables, etc.
This Product is used by:
- Electrical Contractors
- Maintenance Engineers
- Telecommunications Engineers
- Gas and Water Utilities
- Railway Companies
- Cable Manufacturers
- Mining Companies
- User Guide
- 3 x 3m HV leads
- Carrying case with lead storage
- Slide in Pass Band overlay (5 supplied)
- Test Record Card (pack of 5)