Alicat Scientific MS Series Stainless Steel Mass Flow Meters
An extremely fast, accurate, stainless steel mass flow meter for use with aggressive gases
Need Help? Call a Flow Engineer 1-800-884-4967
We're open 8:00am to 5:30pm ET
- 316L construction with 316L encapsulated sensors in flow path for aggressive gases
- Flow ranges: 0.5 SCCM to 3000 SLPM
- Standard accuracy: ±0.8% of reading ±0.2% of full scale
- Repeatability: ±0.2% of FS
- 10 millisecond response time
- Measures mass flow, volumetric flow, pressure (PSIA) and temperature (° Celsius)
- Customizable units of measure
- Multiple digital & analog Inputs/Outputs
- Turndown ratio of 100:1
- 30 factory installed, user selectable gas calibrations
- NIST traceable
The Alicat Scientific MS series mass flow meters are an accurate, versatile, dependable and cost effective solution to measuring gas flow. Unlike traditional mass flow meters, Alicat Scientific mass flow meters utilize laminar flow and differential pressure technology which results in an extremely fast, accurate meter with no warm-up time and unparalleled versatility.
The Alicat Scientific's MS series mass flow meter was designed to meet and exceed the requirements that customers place on mass flow meters. Flow ranges are available from 0.5 standard cubic centimeters per minute to 2000 standard liters per minute with a 100:1 turndown ratio. Basic accuracy is ±0.8% of reading ±0.2% of full scale. Calibrated and ready for use with 20 gases and 10 gas blends, The MS series has a remarkably fast start-up time and a response time of just 10 milliseconds.
The Alicat Scientifics MS series mass flow meter is an extremely versatile instrument. In addition to mass flow measurements, the MS series also measures pressure, temperature and volumetric flow which means fewer instruments to buy and install. The MS series meter can also be equipped with an Alicat 9V battery pack to make a stand alone secondary calibration standard or flow verification meter. Alicat's patented technology allows its mass flow meters to have very few moving parts. All of the internal components are fixed in place resulting in very little physical change inside the mass flow meter. Little physical change in the flow cavity means higher rates of consistency and repeatability.
Alicat Scientific MS series mass flow meters were designed to be used as a stand-alone device. All measured parameters are displayed in real time on the digital display. Any measured parameter can be brought to the center of the screen. The push button interface allows easy configuration of the meter without the need for computers, complicated software or scripts. The MS series features Gas Select which allows users to select from 30 gases and gas blends via the display or through the RS-232 interface. Remote displays are also available. MS series mass flow meters are equipped with multiple analog outputs in addition to the RS-232 digital output.
|Feature||Alicat Scientific MS Series Mass Flow Meters|
|Max Flow Range||0.5 SCCM to 2000 SLPM|
|Accuracy||±0.8% of reading ±0.2% of full scale|
|Repeatability||±0.2% of FS|
|Response time||Less than 10 ms|
|Compatible corrosive/ aggressive gases||
Please consider these optional accessories.
This product can be used in the following applications: