Fluke Calibration Model 3125 Surface Calibrator (formerly Hart Scientific)
Stable and uniform surface calibrator for temperatures up to 400°C
Need Help? Call 1-800-884-4967 8:00am to 5:00pm ET
- Temperature range: 35°C to 400°C
- Accuracy to ±0.5°C
- Stability to ±0.2°C
- Uniformity to ±0.3°C
- Resolution: 0.01°
- 325 watt, solid-state controlled heater
The Fluke Calibration Model 3125 Surface Calibrator takes advantage of the proprietary 2200 temperature controller and gives you the best possible conditions for calibrating surface sensors. The 3125 surface has a uniform surface temperature and reaches temperatures as high as 400°C.
The 3125 test surface is milled aluminum for an absolutely smooth and true calibration work area with maximum thermal conductivity. The 12.25-square-inch test surface is large enough to calibrate more than one sensor at a time. The 3125 surface calibrator can be used with a reference surface sensor or PRT. PRTs (3/16" diameter) may be inserted through a drilled hole into the center of the block for use as reference thermometers or for easy recalibration of the unit's display.
With an accuracy of ±0.5°C to 200°C and ±1°C to 400°C, you can use the 3125 to calibrate almost any surface probe, thermistor, thin film sensor, RTD, thermocouple, ribbon sensor, or surface mount cutouts, fuses, and switches. The Model 3125 stability is within ±0.3°C at 400°C, and uniformity within the center three inches of the surface is ±0.6°C at 200°C.