Fluke 123 ScopeMeter Test Tool

For low voltage (below 24VAC or 60VDC) applications, measures from -58 to 302°F.

For use with type-K thermocouples in low voltage applications (below 24VAC or 60VDC).

2 & 4mm test probes, large jaw probe tip, 4mm banana plug & hook clip reference leads, and large jaw alligator clip for 4mm banana plug.

Heavy duty construction with 10 slots for wires up to 0.3 inches (8mm) in diameter.

SureGrip electrical test lead set includes alligator clips, test probes, and right to right silicone leads.

Pair of 4.9ft (1.5m) SureGrip silicone-insulated test leads with right angle safety shrouded, standard diameter banana plug on both ends.

SureGrip electrical test lead set includes alligator clips, flat bladed test probes, and straight to right silicone leads.

Pair of 4.9ft (1.5m) SureGrip silicone-insulated wire with safety shrouded, standard diameter, straight to right angle banana plugs.

Insulated test probes, extenders, and silicone right angle to straight test leads for high energy environments.

One pair (red & black) of 60in silicone-insulated leads, useable from -112 to 158°F (-80 to 70°C).

One pair (red & black) of heavy duty EPDM insulated leads, 4.9ft (1.5m) length with safety shrouded, standard diameter banana plugs.

One pair (red & black) of flexible silicone insulated leads with sharp needle point tips adjustable from 0 to 76mm.

Comfort grip probes with silicone insulated, right-angle test leads.

One pair (red & black) of comfort grip probes with 4ft (1.22m) PVC insulated leads and right angle shrouded banana plugs.

One pair (red & black) of silicone test leads with right shrouded 4mm banana plugs and 2mm probe with 4mm removable lantern tip.

Includes small and large SureGrip alligator clips, lantern tip probes, and silicone test leads in a soft case.

Includes probes with multiple spring-loaded sharp tips, micro-grabbers, leads, mini-alligator clips, and pouch.

FF rated, 500mA, 1000V, and 50kA fuse for use with 4mm shrouded test leads.

0.16 to 0.75 inch (4 to 19mm) adjustable length test tips for use in different measurement environments.

10 or 100A current, 600V maximum voltage, with zero error adjustment and BNC connector.

Allows accurate measurement of currents from 100mA to 1000A rms (5Hz to 100kHz) without breaking into the circuit.

Battery-powered, Hall-effect probe measures 600AAC or 1000ADC without breaking the circuit.

Dual range (20A and 200A) measurement with voltage output, BNC connector, and dual-banana adapter.

30, 300, and 3000A current ranges with voltage output, BNC connector, and dual-banana adapter.

30, 300, and 3000A current ranges with flexible head, voltage output, BNC connector, and banana adapter.

CAT III 300V safety rated current clamp with 30A DC (20A AC) range.

CAT III 300V safety rated current clamp with 450A DC (300A AC) range.

CAT IV 600V & CAT III 1000V safety rated clamp with BNC connector for measuring up to 400A.

CAT IV 600V & CAT III 1000V safety rated clamp for measuring up to 400A with shrouded dual-banana plug connector.

60, 600, and 6000A current ranges with flexible head, voltage output, and BNC connector.

Rugged ballistic cloth with heavy duty hardware, including a steel reinforced frame.

Heavy duty case with accessory storage compartments.

Zippered carrying case with storage compartments and shoulder strap.

Set of 2 adapters, dual-banana plug (4mm male) to female BNC, 600V RMS max.

Set of 2 adapters, dual-banana plug (4mm female) to male BNC, 600V RMS max.

2 sets of 3 cables with red, black, and gray male BNC connectors, 300V RMS max signal voltage, and 600V RMS max to ground.

Set of 2 T-connectors, male BNC to dual female BNC adapters with 300V RMS max signal voltage and 600V RMS max to ground.

Set of four hook clips (two red and two gray).